Windsor SP17-10090240, SP17IE-10090270 Safety, Read ALL Instructions Before Using this Machine

Page 5

SAFETY

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precaution must always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE.

To reduce the risk of fire, electric shock, or injury:

Use only indoors. Do not use outdoors or expose to rain.

Use only as described in this manual. Use only manufacturer’s recommended components and attachments.

If the machine is not working properly, has been dropped, damaged, left outdoors, or dropped into water, return it to an authorized service center.

Do not operate the machine with any openings blocked. Keep openings free of debris that may reduce airflow.

Machine can cause a fire when operating near flammable vapors or materials. Do not operate this machine near flammable fluids, dust or vapors.

This machine is suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices for more than normal housekeeping purposes.

Maintenance and repairs must be done by qualified personnel.

During operation, attention shall be paid to other persons, especially children.

The machine shall only be operated by instructed and authorized persons.

When leaving unattended, unplug the machine.

Do not handle the plug or machine with wet hands.

Do not unplug machine by pulling on cord. To unplug, grasp the plug, not the cord.

Do not use with damaged cord or plug. Follow all instructions in this manual concerning grounding the machine.

Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners.

Do not pull/run machine over cord. Keep cord away from heated surfaces.

Connect to a properly grounded outlet. See Grounding Instructions.

SAVE THESE INSTRUCTIONS

86309580 FLOOR POLISHER 10/08/08

2-1

Image 5
Contents Floor Polisher Machine Data LOG/OVERVIEW Table of Contents HOW to USE this Manual Read ALL Instructions Before Using this Machine SafetyHazard Intensity Level For SafetyGrounding INSTUCTIONS-120V This Product is for Commercial USE only Grounding INSTRUCTIONS-230VSafety Label Location Motor Technical SpecificationsHandle Installation Controls Handle Height AdjustmentOperation Machine Operation Floor Polisher 10/08/08 Service Schedule MaintenanceScrub Brushes Uncoated FloorsProblem Cause Solution Machine TroubleshootingFloor Polisher 10/08/08 BRUSH/PAD Driver PRV no QTY Description Serial no From ELECTRICAL-120V ELECTRICAL-120V ELECTRICAL-230V CLAMP, 5/16 Nylon Cord SET, Euro 1.5MM X SP17HDIE Deck AXLE, Main Polisher Handle Handle Motor Motor WIRING-120V Wiring Suggested Spare Parts Floor Polisher