Windsor SP13-10090220, SP17IE-10090270, SP17IA-10090260, SP15-10090230 manual HOW to USE this Manual

Page 4

HOW TO USE THIS MANUAL

This manual contains the following sections:

-HOW TO USE THIS MANUAL

-SAFETY

-OPERATIONS

-MAINTENANCE

-PARTS LIST

The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.

Parts may be ordered from authorized dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine. The MACHINE DATA box is located on the inside of the front cover of this manual.

The SAFETY section contains important information regarding hazard or unsafe practices of the machine. Levels of hazards are identified that could result in product or personal injury, or severe injury resulting in death.

The OPERATIONS section is to familiarize the operator with the operation and function of the machine.

The MAINTENANCE section contains preventive maintenance to keep the machine and its components in good working condition. They are listed in this general order:

The PARTS LIST section contains assembled parts illustrations and corresponding parts list. The parts lists include a number of columns of information:

-REF – column refers to the reference number on the parts illustration.

-PART NO. – column lists the part number for the part.

-PRV NO. - Reference No.

-QTY – column lists the quantity of the part used in that area of the machine.

-DESCRIPTION – column is a brief description of the part.

-SERIAL NO. FROM – If this column has an (*) and a Reference number, see the SERIAL NUMBERS page in the back of your manual. If column has two asterisk (**), call manufacturer for serial number. The serial number indicates the first machine the part number is applicable to. The main illustration shows the most current design of the machine. When a boxed illustration is shown, it displays the older design.

-NOTES – column for information not noted by the other columns.

NOTE: If a service or option kit is installed on your machine, be sure to keep the KIT INSTRUCTIONS which came with the kit. It contains replacement parts numbers needed for ordering future parts.

NOTE: The number on the lower left corner of the front cover is the part number for this manual.

1-1

86309580 FLOOR POLISHER 10/08/08

Image 4
Contents Floor Polisher Machine Data LOG/OVERVIEW Table of Contents HOW to USE this Manual Safety Read ALL Instructions Before Using this MachineFor Safety Hazard Intensity LevelGrounding INSTUCTIONS-120V Grounding INSTRUCTIONS-230V This Product is for Commercial USE onlySafety Label Location Technical Specifications MotorHandle Installation Operation Handle Height AdjustmentControls Machine Operation Floor Polisher 10/08/08 Maintenance Service ScheduleScrub Brushes Uncoated FloorsMachine Troubleshooting Problem Cause SolutionFloor Polisher 10/08/08 BRUSH/PAD Driver PRV no QTY Description Serial no From ELECTRICAL-120V ELECTRICAL-120V ELECTRICAL-230V CLAMP, 5/16 Nylon Cord SET, Euro 1.5MM X SP17HDIE Deck AXLE, Main Polisher Handle Handle Motor Motor WIRING-120V Wiring Suggested Spare Parts Floor Polisher