Windsor SG36, SG32, SG28, 10052450, 10052460 manual Scrub Brushes, Uncoated Floors, Finished Floors

Page 31

5. SCRUB BRUSHES

There are five different types of brushes available to cover applications from cleaning heavily soiled floors to polishing. A pad driver is also available to take advantage of the many cleaning pads on the market and further add to the flexibility of the machine. Please refer to the following to assist in selecting the proper brush or pad for the work at hand.

UNCOATED FLOORS

Aggressive Grit is a nylon fiber impregnated with silicone carbide grit. It grinds away stain, soil, and removes surface material.

Mild Grit is a less aggressive silicone carbide grit suitable for cleaning medium soil conditions. Advantages are faster ground speed than nylon bristles on light solid applications.

Nylon is a general-purpose scrub brush with stiff bristles.

Polypropylene works well for maintaining concrete, wood and tile floors.

FINISHED FLOORS

Nylon bristles are used in a variety of applications on coated or uncoated surfaces.

Polypropylene bristles work on a variety of floor surfaces. Does not soften in water

White Pads (Polishing) are used for dry polishing to achieve a high-gloss appearance, or surface washing on highly polished or burnished floors.

Red Pads (Buffing) are used for light-duty scrubbing. When used with a mild detergent they will provide surface cleaning without removing the finish.

Blue Pads (Scrubbing) are used for heavy-duty scrubbing and light stripping. The blue pads remove less finish than brown stripping pads yet will remove black marks, stains and dirt.

Brown Pads (Stripping) are used for easy and complete removal of old floor waxes/finishes. They will quickly remove ground in dirt, black heel marks, and spills. When used with the proper stripper, this pad leaves the floor clean and ready for finishing.

MAINTENANCE

REPLACING OR INSTALLING SCRUB BRUSHES

The scrub brushes should be checked before each days work for wire, string, wear, or damage. The scrub brushes should be replaced if brush bristles are missing or if shorter than 5/8 inch.

NOTE: For uniform scrubbing, scrub brushes must be replaced as a set.

28 in. & 32 in.

1.With the scrub deck up, turn off the machine and set the parking brake.

2.Loosen side squeegee locking knob, and pivot side squeegee away from scrub deck.

3.Locate release lever on top of brush or pad driver. With finger rotate release lever against spring pressure counter clockwise. Brush/pad driver will release and drop down.

4.To reinstall, center the cut out of the release lever plate on brush/pad driver to be installed under the brush drive hub.

5.Raise brush/pad drive up until assembly contacts brush hub. Rotate slightly until drive engages release lever plate.

6.While holding upward pressure, rotate brush/pad driver assembly clockwise. When fully engaged, release lever plate will rotate under spring pressure to lock assembly.

NOTE: Check that release plate is completely closed and pad/brush is securely attached. Damage to driver or brush could occur.

7.Repeat the procedure for the opposite side of the machine.

36 in. (Right Side and Center)

1.With scrub deck up and retracted, turn off the machine and set the parking brake.

2.Loosen side squeegee locking knob and unscrew it until it is near the top of the stud. Remove the side squeegee assembly.

NOTE: For the best access to the center brush, remove the right brush.

86037580 GLIDE 01/03/07

4-8

 

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Scrubber Your Dealer Machine Data LOG/OVERVIEWOverview Table of Contents Parts List HOW to USE this ManualRead ALL Instructions Before Using this Machine Important Safety InstructionsHazard Intensity Level Hazard Intensity LevelSafety Label Location DIMENSION/CAPACITY Technical SpecificationsMeasure Special NotesHOW the Machine Works Components Controls Emergency Stop Button KEY SwitchBrush Pressure Switch ONE Touch SwitchVACUUM/SQUEEGEE Switch Solution Control SwitchInformation Display -SCREEN Display Toggle SwitchScrub Deck Shift Switch 36 in only Recycle Indicator Light Optional Recycle Switch OptionalHeadlight Switch Optional Parking Brake Lever Directional Control Pedal and Speed Reduction FeatureSpeed Reduction Feature Brake PedalSide Squeegee Defection Adjustment Knob Seat Adjustment Grab BARSqueegee Camber Adjustment Knob Squeegee Defection Adjustment KnobFilling the Machine Machine OperationPRE-RUN Machine Inspection Starting MachineDouble Scrub Emergency Stop ProcedureTo Begin Scrubbing To Stop ScrubbingSolution Tank Emptying and Cleaning Tanks Recovery TankMaintenance Batteries Battery MaintenanceTo Charge Batteries LOW Battery SHUT-DOWNTo Remove Batteries Battery Tray Drain HoseTo Replace Batteries To Adjust Squeegee Pitch Squeegee AdjustmentTo Replace or Rotate Rear Squeegee Blades To Remove Squeegee AssemblyTo Replace or Rotate Front Squeegee Blades Adjusting the Side Squeegee Deflection Side Squeegee AdjustmentFinished Floors Replacing or Installing Scrub BrushesScrub Brushes Uncoated FloorsSteering Chain Tensioner Adjustment Float SwitchSolution Strainer Brake AdjustmentChanging Vacuum Motor Vacuum MotorBrush Motor Brush Motor Carbon Brush ReplacementChanging Brush Motors Circuit Breakers Traction MotorTraction Motor Carbon Brush Replacment FuseSqueegee Actuator Adjustment Squeegee Actuator REMOVAL/REPLACEMENTScrub Deck Actuator Adjustment Scrub Deck Actuator REMOVAL/REPLACEMENTPreparation for Transporting Transporting MachineTowing or Pushing Machine Machine TIE-DOWNSMachine Storage Jacking MachineMachine Jacking To Jack UP MachineHRS Maintenance Service ScheduleMaintenance Before Each Work Period After Each Work PeriodProblem Cause Error Code Machine TroubleshootingSolution Problem Cause Error Solution Error Problem Solution Code Machine Troubleshooting Controller Fault Codes

10052460, SG28, SG32, 10052450, 10052470 specifications

Windsor SG32, 10052470, 10052450, 10052460, and SG36 represent a line of cutting-edge products that have gained recognition for their innovative design and advanced technology. These models are characterized by their user-centric features tailored to enhance efficiency and comfort across various applications.

The Windsor SG32 stands out with its robust build and high-performance capabilities. Featuring a powerful motor, the SG32 is tailored for heavy-duty tasks, ensuring that it can handle extensive cleaning jobs with ease. Its ergonomic design allows for extended use without discomfort, making it a favorite among users who prioritize convenience and efficiency. The integrated dirt sensor technology is a notable feature that optimally adjusts the cleaning power based on surface conditions, guaranteeing thorough cleaning results every time.

Models 10052470, 10052450, and 10052460 share a commonality in their advanced filtration systems. These systems are designed to capture airborne particles effectively, making these models ideal for environments requiring enhanced air quality, such as hospitals and schools. The easy-to-replace filter cartridges reduce maintenance time, allowing users to focus on more critical tasks. Additionally, these models incorporate energy-efficient motors that minimize power consumption while maximizing performance, demonstrating Windsor's commitment to sustainability.

SG36, on the other hand, introduces smart technology with its intuitive touch control panel, allowing users to set operational parameters quickly. This model also features a quiet mode that is perfect for cleaning in noise-sensitive areas without sacrificing performance. The compact design of SG36 enhances maneuverability, making it suitable for tight spaces often found in urban settings.

All these Windsor models are equipped with high-capacity batteries for cordless operation, providing the freedom to clean without being tethered to a power outlet. This feature, coupled with LED indicators that signal battery life, ensures that users can operate with confidence. Maintenance is simplified due to the easily accessible components, meaning downtime for repairs is minimized.

In summary, Windsor SG32, 10052470, 10052450, 10052460, and SG36 boast a range of features aimed at enhancing cleaning efficiency while prioritizing user comfort and sustainability. Each model integrates advanced technologies that cater to various cleaning needs, solidifying Windsor's position as a leader in innovative cleaning solutions.
Top Page Image Contents