Windsor NWIFE 10125340, NW 10125330 manual Hazard Intensity Level, Do not Operate Machine

Page 6

SAFETY

HAZARD INTENSITY LEVEL

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNINGand CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment.

Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating condition. Following is information that signals some potentially dangerous conditions to the operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use Windsor approved replacement parts.

2-2

86011370 NUWAVE 05/01/07

Image 6
Contents Wide Area Vacuum Machine Data LOG/OVERVIEW Overview Table of Contents HOW to USE this Manual Safety Read ALL Instructions Before Using this MachineHazard Intensity Level Do not Operate MachineElectrical SafteyGrounding Instructions Extension CordsSafety Label Location Technical Specifications AmpsOperation Controls & ComponetsIntake Filter SET UP Cleaning MaintenanceCleaning Route Accessory Port Cord Hooks HOW IT OperatesBrush Deck Mounting Bolts Brush Replacement Brush DeckBrush Removal Belt Replacement Primary Drive Belt ReplacementSecondary Belt Replacement Vacuum Motor Carbon Brushes Replacement Remove VAC Motor and FiltersDaily Maintenance REGULAR/PERIODIC MaintenanceDaily Weekly Monthly Quarterly Parts List Brush Deck PRV no QTY Description Serial no From HOUSING, Brush DriveHOUSING, Brush Release Clip BLKBrush Motor BRACKET, CAPACITOR, Motor MNT MOTOR, 115V, 0.5HP, Induction With CapacitorsMOTOR, 230V, .5HP, Induction WASHER, Split LOCK, ¼, SSControl Panel LIGHT, INDICATOR, RED, 120VAC BOOT, Circuit Breaker MP/MBSWITCH, Dpdt 2-POSITION Rocker LABEL, Ground Symbol 230V onlyCover BRKT, Accessory Port Hinge COVER, Accessory PortGASKET, Accessory Port Cover SWITCH, 125 VAC SP NC RollerDecal LABEL, Nuwave RT LABEL, Brush InstallationLABEL, Control Panel Vacuum LABEL, Nuwave LTFrame SCR. M8X20 Hhms BRKT, Spring AdjustSCR, Adjustment Deck Spring WELDMENT, Handle BraceHandle HANDLE, MAIN, Molded Grip HOOK, CORD, ConsoleCONSOLE, TRIMMED, BLU BRACKET, LEVER, ConsoleHousing SCR, M8X25 FHCS, BLK NET, CARGO, MoldedCLIP, TREE, Fastener HINGE, BodyVacuum PLATE, MOUNT, VAC Motor GASKET, Accessory PortSWITCH, Vacuum 15 H20 NC/NO SCR, M6X16 Hhms GR 10.9 PLTWiring DIAGRAM-120V HARNESS, Switch Vacuum WIRE, JUMPER, 130L X 14GA BLKHARNESS, Main Vacuum Wiring DIAGRAM-230V HARNESS, MAIN, Vacuum EMC Tilter AssySuggested Spare Parts Options HOLSTER-OPTION ASSY, Hose Wire FORM, HolsterHolster Option Extension TubeNuwave 08/11/08