4 Summary of the HP/Phoenix BIOS

HP/Phoenix BIOS (BIOS version: GJ.07.xx)

POST Test

 

 

 

 

Description

 

 

 

 

 

 

 

 

 

 

System BIOS Tests

 

 

 

 

 

 

 

 

 

 

LED Test

Tests the LEDs on the control panel.

 

 

 

 

 

 

 

 

Processor Test

Tests the processor’s registers. Test failure causes the boot process to

abort.

 

 

 

 

 

 

 

 

 

 

 

System (BIOS) ROM Test

Calculates an 8-bit checksum. Test failure causes the boot process to

abort.

 

 

 

 

 

 

 

 

 

 

 

RAM Refresh Timer Test

Tests the RAM refresh timer circuitry. Test failure causes the boot process

to abort.

 

 

 

 

 

 

 

 

 

 

 

 

Checks the first 64 KB of system RAM used to store data corresponding to

Interrupt RAM Test

various system interrupt vector addresses. Test failures cause the boot

 

process to abort.

 

 

 

 

 

 

 

 

 

Tests the system ROM BIOS and shadows it. Failure to shadow the ROM

Shadow the System ROM

BIOS will cause an error code to display. The boot process will continue,

BIOS

but the system will execute from ROM. This test is not performed after a

 

soft reset (using

 

 

 

 

and

).

 

 

 

 

 

 

 

 

 

 

 

Load CMOS Memory

Checks the serial EEPROM and returns an error code if it has been

corrupted. Copies the contents of the EEPROM into CMOS RAM.

 

 

 

 

 

 

 

CMOS RAM Test

Checks the CMOS RAM for start-up power loss, verifies the CMOS RAM

checksum(s). Test failure causes error codes to display.

 

 

 

 

 

 

 

Internal Cache

Tests the processor’s internal level-one cache RAM. Test failure causes an

Memory Test

error code to display and the boot process to abort.

 

 

 

 

 

 

 

 

 

Video Tests

 

 

 

Initializes the video subsystem, tests the video shadow RAM, and, if

Initialize the Video

required, shadows the video BIOS. A failure causes an error code to

 

display, but the boot process continues.

 

 

110