HP 525 5/XX, 520 5/XX manual Using the HyperTerminal Application, 140

	6 Aztech AT3300 Audio Fax/Data Modem
	European Firmware and Telephone Line Configuration
	4 After installing and localizing the Aztech AT3300 audio fax/data
		modem, you must then re-install the Mediatrends Quip software,
		since its license requires the card’s identification. For details, see the
		Localization Instructions and Replacement Instructions notices
		which accompany the replacement card.
NOTE	Re-installing the Mediatrends Quip software requires the user password
	and a recorded blank message (this is the case, if no previous message
	has been recorded).
	Using the HyperTerminal Application
	By using the HyperTerminal application supplied with Windows 95, you
	can manually localize the firmware code for European configurations.
	To use the HyperTerminal application:
	• Click the Start button, point to Programs, then Accessories, then
		select HyperTerminal.
	• Double click the Hypertrm.exe icon, and enter the name:
		AT3300 test
	•	Then click OK.
	The Phone Number dialog box will then be displayed.
	• Enter 11 in the Phone number box.
	•	Then click OK.
	The Connect dialog box will then be displayed. Click cancel. Access to
	the HyperTerminal session will then follow, indicating its name
	(AT3300 test), as defined earlier.

140