1 HP Vectra 500 Series

System Overview

Comparison of HP Vectra 500 Series

Desktop and Minitower Models

The HP Vectra 500 Series PCs come in two packages, a desktop box and a minitower box. The following table shows the differences between the two packages.

Component

Desktop

Minitower

 

 

 

IDE Controller

Two connectors for hard disk drives

Two connectors for hard disk

Primary channel connectors

 

drives

 

 

 

IDE Controller

One connector is for a CD-ROM

Two connectors for a

Secondary channel connectors

 

supplementary hard disk drive and

 

 

CD-ROM

 

 

 

Floppy disk controller

Two connectors :

Two connectors for 3.5-inch floppy

connectors

- One for a 3.5-inch floppy disk drive

disk drive

 

- One for either a tape drive or a

One connector for 5.25-inch floppy

 

disk drive or a tape drive

 

5.25-inch disk drive

 

Maximum two devices connected

 

 

 

 

simultaneously

 

 

 

Expansion card slots (on

Two 16-bit ISA

Two 16-bit ISA

backplane)

(full-length 30 cm / 12-inches)

(full-length 30 cm / 12-inches)

 

One Combination slot (32-bit PCI or

One 16-bit ISA

 

one 16-bit ISA )

(short-length 15 cm / 6-inches)

 

One 32-bit PCI (full-length)

One Combination slot (32-bit PCI

 

 

or one 16-bit ISA )

 

 

Two 32-bit PCI (full-length)

 

 

 

Internal device shelves

One for hard disk drive

Two for hard disk drives

 

 

 

Front-access device shelves

One 3.5-inch

One 3.5-inch

 

One 5.25-inch

Three 5.25-inch

 

One 5.25-inch, 1-inch high (or an

 

 

internal drive)

 

 

 

 

19