Windsor UB2000F, LB2000IA manual Grounding INSTUCTIONS-120V, Electrical

Page 7

GROUNDING INSTUCTIONS-120V

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

ELECTRICAL:

In the USA this machine operates on a one 15 amp nominal 120V, 60 hz, A.C. power circuit. The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment- grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.

This appliance is for use on a nominal 120-volt circuit, and has a grounded plug that looks like the plug in “Fig. A”. A temporary adaptor that looks like the adaptor in “Fig . C” may be used to connect this plug to a 2-pole receptacle as shown in “Fig. B”, if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet (Fig. A) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by a metal screw.

SAFETY

Grounding Pin

GROUNDING CONNECTION

USING AN ADAPTOR

Grounded

Outlet

FIGURE A

Metal Screw

Tab for Grounding

Adaptor

 

Grounded

FIGURE B

Screw

Outlet Box

 

Adaptor

FIGURE C

Note: Adaptors are not allowed in Canada.

Improper connection of the equipment- grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

86309600 (2000) BURNISHER 10/08/08

2-3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Models High Speed BurnisherOverview Machine Data LOG/OVERVIEWTable of Contents HOW to USE this Manual Read ALL Instructions Before Using this Machine SafetyHazard Intensity Level For SafetyElectrical Grounding INSTUCTIONS-120VThis Product is for Commercial USE only Grounding INSTRUCTIONS-230VSafety Label Location DIMENSION/CAPACITY Technical SpecificationsOperation Handle InstallationControls Machine Troubleshooting MaintenanceMaintenance Daily Monthly Service Schedule86309600 2000 Burnisher 10/08/08 Deck PRV no QTY Description Serial no From Electrical Electrical HANDLE-LOWER Part PRV QTY Description Serial HANDLE-UPPER PRV QTY Description Serial Motor COVER, Motor 1.25HP PAD/DRIVER SCR, #10 X 3/8 Pphst Type B WIRING-120V WIRING-230V Suggested Spare Parts 86309600 2000 Burnisher
Top Page Image Contents