Windsor UB2000F, LB2000IA manual Hazard Intensity Level, For Safety

Page 6

SAFETY

The following symbols are used throughout this guide as indicated in their descriptions:

HAZARD INTENSITY LEVEL

There are three levels of hazard intensity identified by signal words -WARNINGand CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions:

WARNING - Hazards or unsafe practices, which COULD result in severe personal injury or death.

CAUTION - Hazards or unsafe practices, which could result in minor personal injury or product or property damage.

FOR SAFETY: To Identify actions which must be followed for safe operation of equipment. Report machine damage or faulty operation immediately. Do not use the machine if it is not in proper operating condition. Following is information that signals some potentially dangerous conditions to the operator or the equipment. Read this information carefully. Know when these conditions can exist. Locate all safety devices on the machine. Please take the necessary steps to train the machine operating personnel.

FOR SAFETY:

DO NOT OPERATE MACHINE:

Unless Trained and Authorized.

Unless Operation Guide is Read and understood.

In Flammable or Explosive areas.

In areas with possible falling objects.

WHEN SERVICING MACHINE:

Avoid moving parts. Do not wear loose clothing; jackets, shirts, or sleeves when working on the machine. Use approved replacement parts.

2-2

86315410 (BU2000) BURNISHER 10/08/08

Image 6
Contents High Speed Burnisher ModelsMachine Data LOG/OVERVIEW OverviewTable of Contents HOW to USE this Manual Safety Read ALL Instructions Before Using this MachineFor Safety Hazard Intensity LevelGrounding INSTUCTIONS-120V ElectricalGrounding INSTRUCTIONS-230V This Product is for Commercial USE onlySafety Label Location Technical Specifications DIMENSION/CAPACITYHandle Installation OperationControls Maintenance Machine TroubleshootingService Schedule Maintenance Daily Monthly86309600 2000 Burnisher 10/08/08 Deck PRV no QTY Description Serial no From Electrical Electrical HANDLE-LOWER Part PRV QTY Description Serial HANDLE-UPPER PRV QTY Description Serial Motor COVER, Motor 1.25HP PAD/DRIVER SCR, #10 X 3/8 Pphst Type B WIRING-120V WIRING-230V Suggested Spare Parts 86309600 2000 Burnisher