OPERATION
HANDLE
ASSEMBLY
2
3
1
HANDLE
MOUNT BRACKET
DECK 
ASSEMBLY
HANDLE INSTALLATION
The machine is shipped with handle unassembled.
Follow these steps for installation:
1.Remove handle and deck assembly from carton.
2.Remove bolt (item 3), washers (item 2), and nut (item 1) from deck assembly.
3.Install Handle Assembly as shown.
4.Slide Bolt (item 3) through, washers (item 2), Handle Mount Brackets and Handle Assembly as shown. Tighten bolt (item 3) and nut (item 1) until the handle cannot twist in the mount bracket (45- 50 foot pounds).
5.Check handle for movement up and down.
6.Plug cord into handle cord receptacle.
86309600 (2000) BURNISHER 10/08/08 |