Servicing the VAC Motor, Carbon Brush Replacement

SERVICING THE VAC MOTOR

CARBON BRUSH REPLACEMENT

1.Disconnect power cord from power source.

2.To access the vac motor, remove the screws that attach the main cover to the head assembly and set the cover to one side.

3.Remove the motor cover by removing two screws. See Figure 1

4.Remove the wire terminal from carbon brush housing. See Figure 2

5.Remove the carbon brush assembly by removing the 2 screws that attach it to the vac motor. See Figure 3

6.Inspect armature commutator. If it is extremely pitted, grooved or not concentric then the motor will need to be replaced or sent to a qualiﬁed service center.

7.Slide the yellow brush housing from plastic holder. See Figure 4

8.Reverse steps 7 through 4 to install new brush and housing (part number S8TOEG845 120 V - S8TOGB839 230 V)

9.Repeat steps 4 through 8 for the other carbon brush.

10.Reverse steps 3 and 2 for re-assembly.

11.Test for proper operation

Fig. 1

Fig. 2

Fig. 3

Fig. 4

T716IE, T716, T720TP, T708IE, T708 specifications

Windsor T708, T716, T720TP, T716IE, and T708IE are part of a sophisticated lineup of commercial-grade cleaning machines engineered for efficiency and versatility in diverse environments. Designed predominantly for facility management and janitorial purposes, these models cater to various cleaning requirements, offering powerful performance and user-friendly features.

The Windsor T708 is notable for its compact design, making it ideal for tight spaces and urban environments. It features a robust vacuum motor that ensures strong suction power, allowing for deep cleaning of carpets and hard floors. This model is equipped with an easy-to-use control panel that simplifies operation, ensuring that users can navigate settings without confusion. The T708 also boasts a lightweight construction, which reduces operator fatigue during prolonged use, enhancing overall productivity.

Moving to the T716, this model builds upon the T708's strengths by incorporating an upgraded filtration system that captures more dust and allergens, promoting healthier indoor air quality. The T716 is designed with ergonomic features, including a padded handle and adjustable height settings, making it suitable for operators of various sizes. Additionally, it offers enhanced maneuverability, facilitating cleaning in large areas with ease.

The T720TP takes efficiency a step further with its advanced technology. This model incorporates a dual-motor system that allows for simultaneous vacuuming and scrubbing, significantly cutting down cleaning time. Moreover, the T720TP features upgraded battery technology for longer runtimes and quicker recharge cycles, ensuring maximum productivity throughout the day.

The T716IE and T708IE are specialized models tailored for environments that require even higher cleaning standards. These IE (Intelligent Efficiency) versions come equipped with smart technology that optimizes performance based on real-time cleaning demands. They include features such as automatic water adjustment and task scheduling, thus providing users with tailored cleaning solutions that reduce waste and enhance effectiveness.

In summary, the Windsor T708, T716, T720TP, T716IE, and T708IE are exemplary machines that demonstrate the fusion of innovation, usability, and efficiency in the field of commercial cleaning. Each model offers unique features tailored to specific cleaning needs, making them invaluable tools for maintaining pristine environments in various settings. Whether tackling small offices or large facilities, these machines are designed to deliver exceptional results and seamless user experiences.