Windsor T716IE, T708IE, T720TP Operation, Daily Maintenance, Electric Drawing

Page 6

OPERATION

This machine is a commercial vacuum designed for wet and dry pick-up.

Dry soil can be vacuumed directly into the tank. To empty the tank of dry soil, remove the top and dump into trash receptacle.

For wet pick-up, remove polyester filter. The machine is equipped with a float shut-off. As the tank is filled to capacity, a float rises and seals the vac intake, causing loss of vacuum. Switch off the vacuum when this happens and bring the machine to a floor drain.

Use the convenient drain hose at the back of the vacuum to empty the tank.

With both wet and dry applications be sure to frequently clean the filter. This is especially true when the vacuum is being used with strippers and wax.

DAILY MAINTENANCE

Caution: Strippers and some detergents produce foam which will damage the vac motors. The vac shut-off may not be sensitive to all foams. Be sure to check that the tank is not filling with foam. Use a defoaming agent to avoid pulling foam through vac motor. Should vac motor become wet, remove source of overflow and immediately run vac motor open to dry.

At the end of each working day:

1.After each use, rinse tank with fresh water. Periodically inspect the recovery tank and decontaminate if necessary, using a Hospital Grade Virucide or a 1:10 bleach to water solution. Waste water should be disposed of properly.

2.Remove head assembly and allow tank to dry.

3.Remove filters for cleaning or to allow to dry.

4.Inspect hoses for wear. Frayed or cracked hoses should be replaced to avoid vacuum loss.

5.Inspect power cord for wear. This cable will lay on wet surfaces. To prevent electrical shock replace cords with frayed or cracked insulation immediately.

 

L

N

 

1

 

ELECTRIC DRAWING

 

1

– terminal block

 

2

– switch

 

3

– motor

 

 

2

 

 

 

3

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Volt only Important Safety Instructions Read ALL Instructions Before Using this MachinePage Electrical Extension CordsGrounding Instructions Vacuum and Accessories Important InstructionsDaily Maintenance OperationElectric Drawing Periodic Maintenance Servicingthe FilterServicingthe VAC Motor Carbon Brush Replacement Servicing the VAC MotorT708/T708IE Vacuum Motor Assembly T708 Tank AssemblyT708 Filter Group T716/T720TP Vacuum Motor Assembly T716/T720TP Filter GroupT716 Tank Assembly T720TP Tank Assembly T720TP CartTSQ16 FRONT-MOUNTED Squeegee TSQ20 FRONT-MOUNTED SqueegeeAccessories LabelsWindsor Industries From previous

T716IE, T716, T720TP, T708IE, T708 specifications

Windsor T708, T716, T720TP, T716IE, and T708IE are part of a sophisticated lineup of commercial-grade cleaning machines engineered for efficiency and versatility in diverse environments. Designed predominantly for facility management and janitorial purposes, these models cater to various cleaning requirements, offering powerful performance and user-friendly features.

The Windsor T708 is notable for its compact design, making it ideal for tight spaces and urban environments. It features a robust vacuum motor that ensures strong suction power, allowing for deep cleaning of carpets and hard floors. This model is equipped with an easy-to-use control panel that simplifies operation, ensuring that users can navigate settings without confusion. The T708 also boasts a lightweight construction, which reduces operator fatigue during prolonged use, enhancing overall productivity.

Moving to the T716, this model builds upon the T708's strengths by incorporating an upgraded filtration system that captures more dust and allergens, promoting healthier indoor air quality. The T716 is designed with ergonomic features, including a padded handle and adjustable height settings, making it suitable for operators of various sizes. Additionally, it offers enhanced maneuverability, facilitating cleaning in large areas with ease.

The T720TP takes efficiency a step further with its advanced technology. This model incorporates a dual-motor system that allows for simultaneous vacuuming and scrubbing, significantly cutting down cleaning time. Moreover, the T720TP features upgraded battery technology for longer runtimes and quicker recharge cycles, ensuring maximum productivity throughout the day.

The T716IE and T708IE are specialized models tailored for environments that require even higher cleaning standards. These IE (Intelligent Efficiency) versions come equipped with smart technology that optimizes performance based on real-time cleaning demands. They include features such as automatic water adjustment and task scheduling, thus providing users with tailored cleaning solutions that reduce waste and enhance effectiveness.

In summary, the Windsor T708, T716, T720TP, T716IE, and T708IE are exemplary machines that demonstrate the fusion of innovation, usability, and efficiency in the field of commercial cleaning. Each model offers unique features tailored to specific cleaning needs, making them invaluable tools for maintaining pristine environments in various settings. Whether tackling small offices or large facilities, these machines are designed to deliver exceptional results and seamless user experiences.
Top Page Image Contents