Windsor T716IE, T708IE Periodic Maintenance, Servicingthe Filter, Servicingthe VAC Motor

Page 7

PERIODIC MAINTENANCE

(Every six to twelve months):

1.Check filter for wear, replace dirt saturated filters that do not respond to normal cleaning.

2.Inspect gasket seals and replace those which have begun to leak.

3.Examine carbon motor brushes and commutator.

Replace both carbon brushes when either is

less than 3/8" long. (PN S8TOEG845) 120V (PN S8TOGB839) 230V

SERVICINGTHE FILTER

The filter is accessed by lifting the head assembly off the tank.

Polyester filter is easily removed by simply lifting the filter basket out of the tank.

Cartridge filters – Remove the filter retainer by turning the black knob 90 degrees counter-clockwise. Cartridge filter will then slide off of float assembly.

NOTE:

Be sure to frequently clean the filter.

Allow filter to dry after being used for wet pick-up.

Filters used for wet pick-up including stripper must be thoroughly cleaned before being allowed to dry.

Worn filters can affect vacuum performance. Replace the filter when it becomes worn out and normal cleaning will not restore vac performance.

SERVICINGTHE VAC MOTOR

MOTOR REPLACEMENT

1.Disconnect power cord from power source.

2.To access the vac motor, remove the screws that attach the main cover to the head assembly and set the cover to one side.

3.Disconnect the motor ’s 2 red lead wires from the main switch.

4.Disconnect green/yellow wire by removing screw from motor core.

5.Remove the four motor mounting screws.

6.Remove motor plate and set aside.

7.Take out the motor and remove the upper and lower gaskets.

8.Inspect gaskets. If they shown any wear or tear in the material, replace.

9.Install gaskets onto new motor. Make sure gaskets are properly seated.

10.Install the new motor. Make sure foam mufflers are positioned properly.

11.Attach motor plate to motor.

12.Connect green/yellow wire to motor core.

13.Connect motor ’s 2 red lead wires to main switch.

14.Re-assemble vac cover.

15.Test for proper operation.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Volt only Read ALL Instructions Before Using this Machine Important Safety InstructionsPage Extension Cords ElectricalGrounding Instructions Important Instructions Vacuum and AccessoriesOperation Daily MaintenanceElectric Drawing Servicingthe Filter Periodic MaintenanceServicingthe VAC Motor Servicing the VAC Motor Carbon Brush ReplacementT708 Tank Assembly T708/T708IE Vacuum Motor AssemblyT708 Filter Group T716/T720TP Filter Group T716/T720TP Vacuum Motor AssemblyT716 Tank Assembly T720TP Cart T720TP Tank AssemblyTSQ20 FRONT-MOUNTED Squeegee TSQ16 FRONT-MOUNTED SqueegeeLabels AccessoriesWindsor Industries From previous

T716IE, T716, T720TP, T708IE, T708 specifications

Windsor T708, T716, T720TP, T716IE, and T708IE are part of a sophisticated lineup of commercial-grade cleaning machines engineered for efficiency and versatility in diverse environments. Designed predominantly for facility management and janitorial purposes, these models cater to various cleaning requirements, offering powerful performance and user-friendly features.

The Windsor T708 is notable for its compact design, making it ideal for tight spaces and urban environments. It features a robust vacuum motor that ensures strong suction power, allowing for deep cleaning of carpets and hard floors. This model is equipped with an easy-to-use control panel that simplifies operation, ensuring that users can navigate settings without confusion. The T708 also boasts a lightweight construction, which reduces operator fatigue during prolonged use, enhancing overall productivity.

Moving to the T716, this model builds upon the T708's strengths by incorporating an upgraded filtration system that captures more dust and allergens, promoting healthier indoor air quality. The T716 is designed with ergonomic features, including a padded handle and adjustable height settings, making it suitable for operators of various sizes. Additionally, it offers enhanced maneuverability, facilitating cleaning in large areas with ease.

The T720TP takes efficiency a step further with its advanced technology. This model incorporates a dual-motor system that allows for simultaneous vacuuming and scrubbing, significantly cutting down cleaning time. Moreover, the T720TP features upgraded battery technology for longer runtimes and quicker recharge cycles, ensuring maximum productivity throughout the day.

The T716IE and T708IE are specialized models tailored for environments that require even higher cleaning standards. These IE (Intelligent Efficiency) versions come equipped with smart technology that optimizes performance based on real-time cleaning demands. They include features such as automatic water adjustment and task scheduling, thus providing users with tailored cleaning solutions that reduce waste and enhance effectiveness.

In summary, the Windsor T708, T716, T720TP, T716IE, and T708IE are exemplary machines that demonstrate the fusion of innovation, usability, and efficiency in the field of commercial cleaning. Each model offers unique features tailored to specific cleaning needs, making them invaluable tools for maintaining pristine environments in various settings. Whether tackling small offices or large facilities, these machines are designed to deliver exceptional results and seamless user experiences.
Top Page Image Contents