Grounding Instructions, Electrical

GROUNDING INSTRUCTIONS

THIS PRODUCT IS FOR COMMERCIAL USE ONLY.

ELECTRICAL:

The amp, hertz, and voltage are listed on the data label found on each machine. Using voltages above or below those indicated on the data label will cause serious damage to the motors.

GROUNDING INSTRUCTIONS:

This appliance must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment- grounding conductor and grounding plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. The D250 is for use on a nominal 115-volt circuit, and has a grounded plug that looks like the plug in “Fig. A”. A temporary adaptor that looks like the adaptor in “Fig . C” may be used to connect this plug to a 2-pole receptacle as shown in “Fig. B”, if a properly grounded outlet is not available. The temporary adaptor should be used only until a properly grounded outlet (Fig. A) can be installed by a qualified electrician. The green colored rigid ear, lug, or the like extending from the adaptor must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the adaptor is used, it must be held in place by a metal screw.

The D250IE is for use on a nominal 230-volt circuit.

WARNING: Improper

connection of the

equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

PROPER GROUNDING (115V)

Grounding Pin

Metal Screw

	Grounded	Adaptor
	Outlet	Grounded Outlet Box
	Fig. A	Grounded Outlet Box
	Fig. A	Fig. B
		Tab For Grounding Screw

Adaptor

Fig. C

NOTE: In Canada, the use of a temporary adaptor is not permitted by the Canadian Electrical Code

CHEMICALS	Non-Compatible
Suitable Chemicals	Non-Compatible
Alkalis	Aldehydes
Detergents	Aromatics Hydrocarbons
Hydroxides	SP Butyls
Soaps	Carbon Tetrachloride
Vinegar	Clorox*
	Chlorinated Bleaches
	Chlorinated Hydrocarbons
	Lysol*
	Methyl Ethel Ketone (MEK)
	Perchorethylene (perc)
	Phenolics
	Trichlorethylene
	D-Limonene

Warning:

Using the incompatible chemicals listed above will damage the machine. Damages of this type are not covered under the 6-3-1 warranty. Carefully read ingredients on manufacturer's label before using any product in this machine.

3	D-250 98637 04/25/02

D250 specifications

The Windsor D250 is a state-of-the-art, high-performance machine designed to meet the needs of a variety of industrial applications. Its robust construction and advanced technology make it a favorite among manufacturers looking for reliability and efficiency in their operations.

One of the standout features of the Windsor D250 is its powerful engine. The machine is equipped with a highly efficient, low-emission engine that reduces operating costs while maintaining high performance levels. This engine not only ensures optimal power delivery but also minimizes environmental impact, adhering to the latest emission standards.

The D250 boasts an advanced hydraulic system, which enhances its operational capabilities. This system offers precise control and quick response times, ensuring that tasks are carried out smoothly and efficiently. With adjustable flow rates and pressure settings, operators can tailor the machine to suit specific applications, thereby increasing productivity and reducing wear on components.

In terms of ergonomic design, the Windsor D250 comes with an operator-friendly cabin that promotes comfort and ease of use. Features such as adjustable seating, intuitive controls, and ample visibility help reduce operator fatigue during long shifts. The machine's layout is optimized for quick access to maintenance points, facilitating routine checks and service tasks, which ultimately prolongs the machine's lifespan.

Another significant characteristic of the D250 is its versatility. It can accommodate a wide range of attachments, making it suitable for various applications, from construction and landscaping to material handling and agricultural work. This flexibility allows businesses to adapt the machine to meet changing project requirements without needing multiple specialized machines.

The Windsor D250 also incorporates advanced safety features, including an automatic shut-off system and robust structures designed to protect operators in the event of accidents. These safety measures ensure compliance with industry standards and provide peace of mind for users.

In summary, the Windsor D250 combines powerful performance, cutting-edge technology, and user-focused design to deliver an exceptional machine for various industrial applications. With its efficient engine, advanced hydraulics, ergonomic features, and robust safety systems, the D250 stands out as a reliable choice for businesses seeking to enhance productivity while ensuring operator comfort and safety.