Whynter RPD-302W instruction manual Caster Installation, Positioning the Unit

Page 8

IV. OPERATION INSTRUCTIONS

CASTER INSTALLATION

Caster installation is recommended to avoid damage to floors .

1.Remove the casters from the bucket of the dehumidifi- er .

2.Position the dehumidifier on its side .

3.Locate the arrow on the bottom of the dehumidifier and insert the caster according to the arrow direction.

4.Slide the caster in as far as it will go. The caster

will snap into place

5. Repeat steps 1 to 4 for the other 3 casters.

POSITIONING THE UNIT

∙This dehumidifier is intended for indoor residen- tial applications only and should not be used for commercial or industrial applications.

∙Place the dehumidifier on a smooth, hard and level floor strong enough to support the appli- ance with a full bucket of water.

∙Do not attempt to roll the appliance over objects.

∙Avoid placing the appliance in an area where the temperature will fall below 53°F. The coils may become covered with frost and may reduce performance.

∙Do not place the appliance near clothes dryer, heater or radiator.

∙Shut all doors, windows and openings to your target dehumidifying space for maximum perfor- mance

∙Allow at least 10” of air space on all sides of the appliance for good air circulation and 20” or more above the appliance

NOTE:

∙Dehumidifiers working in a basement will have little or no effect on adjacent enclosed rooms such as closets, unless there is enough circulation of air in and out of the enclosed area.

∙If the appliance has been switched off and needs to be switched on again, allow approximately three minutes for the correct operation to resume.

∙Select a suitable location and make sure you have easy access to the electrical outlet.

∙Ensure the air filter and water bucket are correctly installed before switching the appliance on.

∙Always be careful when moving the appliance with a full water bucket.

∙Ensure that the safety requirements and warnings detailed in this user manual are followed when oper- ating this appliance.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Whynter 30 Pint Residential Portable Dehumidifier Disposal Information Table of Contents Safety Precautions Technical Data Model II. IntroductionHow it Works Energy Saving GuideIII. Parts and Controls AIR Filters Installation When Bucket Full Lamp is onIV. Operation Instructions Start OperationCaster Installation Positioning the UnitContinuous Drainage Gravity MethodVI. Maintenance Cleaning the bucketCleaning the air filter End of Season StorageVII. Tips on When to USE Your Portable Dehumidifier Respiratory problems or allergiesExcess moisture BasementsVIII. Troubleshooting Problem Possible Causes Solutions90%RH VIII. Troubleshooting Error CodesError Code Reason 30%RH ONE Year Limited Warranty

RPD-302W specifications

The Whynter RPD-302W is a top-of-the-line portable beverage refrigerator designed to meet the needs of avid beverage enthusiasts and households alike. With its stylish design and advanced functionalities, this refrigerator offers an ideal storage solution for a variety of beverages, including soda, wine, and bottled water.

One of the main features of the RPD-302W is its impressive capacity. This refrigerator can hold up to 30 standard 12-ounce cans, making it perfect for parties, gatherings, or even everyday use. This spacious interior allows users to stockpile their favorite beverages, ensuring refreshment is always at hand.

The Whynter RPD-302W also incorporates advanced cooling technologies. It employs a compressor cooling system, which provides efficient and rapid cooling to maintain the desired temperature within the refrigerator. This technology allows the unit to quickly reach and maintain temperatures ranging from 30 to 60 degrees Fahrenheit, providing the flexibility to store beverages at the optimal temperature.

Another key characteristic of the RPD-302W is its dual-zone cooling design. This feature allows for independent temperature settings, accommodating different types of beverages that may require specific storage conditions. Whether it's red wine, white wine, or sodas, users can customize the climate for optimal preservation.

For ease of use, the Whynter RPD-302W is equipped with a digital control panel that provides precise temperature adjustments at your fingertips. The control panel includes an LED display, making it simple to monitor and set the desired temperature accurately.

The sleek and modern aesthetic of the RPD-302W also deserves mention. Its stainless-steel finish paired with tempered glass doors adds a touch of sophistication to any space. The interior’s soft blue LED lighting not only enhances visibility but also adds a stylish flair.

Moreover, the refrigerator is designed with energy efficiency in mind. It is environmentally friendly, utilizing CFC-free refrigerants and having a low energy consumption rate, which makes it ideal for eco-conscious users looking to minimize their carbon footprint.

In conclusion, the Whynter RPD-302W is a versatile, feature-rich beverage refrigerator that combines innovative cooling technology with user-friendly functionality and a stylish design. Its ability to cater to various storage needs positions it as an excellent choice for anyone seeking to enhance their beverage storage experience.
Top Page Image Contents