Wayne-Dalton 7100 Series Residential Dust label For California Residents Only

Page 16

Torsion spring tag(s) (one per spring)

WARNING

Residential Dust label

(For California Residents Only)

Residential

warning label

WARNING

HIGH SPRING TENSION CAN CAUSE

SERIOUS INJURY OR DEATH.

DO NOT adjust, repair or remove springs or parts to which springs are connected, such as steel brackets, cables, wood blocks, fasteners or other parts of the counterbalance system.

Adjustments or repairs must ONLY be made by a trained door systems technician using proper tools and instructions.

DO NOT remove, cover or paint over this tag. Product user should inspect this tag periodically for legibility and should order a replacement tag from the door manufacturer, as needed.

WARNING

Lift handles/gripping points are required on this door, located as spelled out in the installation instructions, even if the door is motor operated.

Failure to install and use these lift handles/

 

 

gripping points on this door can result in

 

 

serious injury to fingers and/or hands, if

 

 

placed in the opening between sections,

 

IMPORTANT

when the door is operated manually.

 

WARNING

 

THIS WOOD PRODUCT REQUIRES PROPER

 

ACC0RDANCE TO THE DIRECTIONS GIVEN IN THE

 

 

FINISHING PRIOR TO ANY DOOR HARDWARE BEING

 

 

APPLIED. BOTH INNER AND OUTER FACES OF THE

 

 

SECTION(S), AS WELL AS ALL EDGE SURFACES

 

important notice

MUST BE PREPARED AND FINISHED IN STRICT

The adjacent bottom corner bracket and

Wood label

MANUAL UNDER “MAINTENANCE AND PAINTING

 

INSTALLATION INSTRUCTIONS AND OWNER’S

all cable retention features including

 

INSTRUCTIONS FOR ALL WOOD DOORS”.

milford pins, cotter pins, & clevis pins are

 

IMPROPER STORAGE, IMPROPER TRANSPORTATION

under HIGH SPRING TENSION.

 

THE EXPOSURE OF THIS WOOD PRODUCT TO

Adjustments and repairs must only be

 

THE LIMITED WARRANTY.

 

 

MOISTURE AND/OR OTHER CONTAMINANTS, VOIDS

made by a trained door systems

 

 

technician, using proper tools and

 

 

instructions.

 

 

DO NOT REMOVE, COVER OR PAINT OVER

 

 

THIS LABEL. PRODUCT USER SHOULD

 

 

INSPECT THIS LABEL PERIODICALLY FOR

 

 

LEGIBILITY AND SHOULD ORDER A

 

 

REPLACEMENT FROM THE DOOR

Bottom section warning labels

MANUFACTURER AS NEEDED.

Lift handles/gripping points are required on this door, located as spelled out in the installation instructions, even if the door is motor operated.

Failure to install and use these lift handles/ gripping points on this door can result in serious injury to fingers and/or hands, if placed in the opening between sections, when the door is operated manually.

WARNING

The adjacent bottom corner bracket and all cable retention features including milford pins, cotter pins, & clevis pins are under HIGH SPRING TENSION.

Adjustments and repairs must only be made by a trained door systems technician, using proper tools and instructions.

DO NOT REMOVE, COVER OR PAINT OVER THIS LABEL. PRODUCT USER SHOULD INSPECT THIS LABEL PERIODICALLY FOR LEGIBILITY AND SHOULD ORDER A REPLACEMENT FROM THE DOOR MANUFACTURER AS NEEDED.

16

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer,

refer to your local yellow pages business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com

Image 16 Wayne-Dalton 7100 Series Residential Dust label For California Residents Only, Torsion spring tags one per spring
Contents Series B l e O f C o n t e n t sParts Breakdown F5. Left Hand and Right Hand Vertical Tracks As RequiredImportant Safety Instructions Tools Required Package ContentsGraduated End Hinge Strut Identification Door Section IdentificationDoor Strut IdentificationPreparing the Opening Removing an Existing DoorHeadroom Requirements Page Track Roller Carriers StruttingFor bottom corner brackets B For bottom corner bracket CFor 3 Long Strut Applications Top FixturesFollow the corresponding steps below Bottom Section Vertical TracksStacking Sections If you have 3 vertical tracksTop Section Horizontal TracksAdjusting Top Fixtures Adjusting top fixture slidesEnd Bearing Brackets Center BracketTorsion Spring Assembly If you don’t have a Coupler AssemblyTools Step Ladder Repeat the same process for the other coupler halveIf you have a Coupler Assembly Torsion Spring AttachmentRear Back Hangs Winding SpringsSecuring Door for Spring Windings Tools Vice ClampsLabel Placement Residential Dust label For California Residents Only Torsion spring tags one per springTools Power drill, 1/8 Drill bit, Tape measure Door Arm HookupLift Handles Pull Down RopeCleaning Your Garage Door Operation and MaintenancePainting Your Garage Door Clear Or Stained FinishesPage Warranty Limited warranty Model 7100 Series

7100 Series specifications

Wayne-Dalton's 7100 Series is a line of high-quality insulated steel garage doors designed to provide both style and functionality. These doors are characterized by their exceptional durability, energy efficiency, and aesthetic appeal, making them a popular choice among homeowners and builders alike.

One of the standout features of the Wayne-Dalton 7100 Series is its construction. Made from double-layered steel with a core of expanded polystyrene insulation, these doors offer superior thermal performance. This insulation helps maintain a consistent temperature within the garage, which is especially beneficial in areas with extreme weather conditions. With an R-value of up to 10.15, the 7100 Series doors significantly reduce energy costs and enhance the comfort of adjacent living spaces.

In addition to energy efficiency, the 7100 Series is designed with sturdiness in mind. The steel construction is reinforced to withstand impact and resist denting, ensuring that the doors maintain their appearance even after years of use. This durability is further enhanced by a corrosion-resistant finish, which helps the doors resist rust and other forms of degradation.

Aesthetically, the Wayne-Dalton 7100 Series offers a range of design options. Homeowners can choose from several panel styles and colors to complement their home's exterior. The doors can also be customized with decorative hardware, including windows and handles, allowing for a personalized touch that enhances curb appeal.

Wayne-Dalton incorporates advanced technology into the 7100 Series, making operation smooth and reliable. The doors are equipped with a high-quality torsion spring system, which ensures easy lifting and lower costs of maintenance. Additionally, the optional Wi-Fi-enabled garage door opener provides enhanced convenience and security, allowing users to monitor and control the door from their smartphones.

The 7100 Series also prioritizes safety, featuring pinch-resistant technology, which prevents fingers from getting caught during operation. This thoughtful design consideration makes the doors safer for families with children and pets.

In conclusion, the Wayne-Dalton 7100 Series is an excellent investment for anyone looking to upgrade their garage door. With its blend of durability, energy efficiency, aesthetic appeal, and advanced technological features, it stands out as one of the top choices on the market today. Whether for new construction or a remodel, this series offers homeowners a versatile and stylish solution for their garage door needs.