Wayne-Dalton 46 installation instructions Vertical Track, Stacking Sections, Installation

Page 15
Vertical Track

 

 

11

Vertical Track

 

 

 

Tools Needed:

IMPORTANT: The tops of the vertical

tracks must be level from side to side.

 

3/16” Drill Bit

If the bottom section was shimmed

 

to level it, The vertical track on the

Power Drill

shimmed side must be raised the height

of the shim.

 

7/16” Socket

Position the left hand vertical track assembly

Driver

over the rollers of the bottom section. Make

 

Tape Measure

sure the counterbalance cable is located

between the rollers and the door jamb. Keep

 

Level

track 5/8” from edge of door as shown in

illustration.

 

Step Ladder

Drill 3/16” pilot holes for the lag screws.

 

 

Loosely fasten jamb brackets and flagangle to

 

the jamb using 5/16” x 2” lag screws.

 

On the bottom jamb bracket, tighten the lag

 

screw securing the bottom jamb bracket to

 

the jamb. Make sure the 5/8” track spacing is

 

maintained.

 

Hang the cable drum over the flagangle.

 

Repeat for the right hand side.

 

 

JAMB

BRACKET

fLAGANGLE

5/16 x 2” hex

head LAG

SCREWS

VERTICAL

TRACK

ASSEMBLY

BOTTOM SECTION

vertical

track

5/8”

roller

flagangle hole

selection

jamb bracket

5/16” x 2” hex head lag screw

INSTALLATION

 

 

12

Stacking Sections

 

 

 

Tools Needed:

NOTE: For door section identification see

 

page 4.

Power Drill

NOTE: Make sure hinges are flipped down,

7/16” Socket

when stacking another section on top.

Place rollers in hinge tubes of the second

Driver

section (lock section).

 

 

With assistance, lift the second section and

 

guide rollers into the vertical tracks.

 

Repeat for other section(s) except top

 

section.

 

Attach center hinge leaves to sections using

 

1/4”-14 x 5/8” self tapping screws. Repeat

 

for the upper hinge leaves.

 

IMPORTANT: Push & hold the hinge

 

leaves against section while securing

 

hinges.

 

NOTE: Install lock at this time (sold

 

separately). See instructions in OPTIONAL

 

SIDE LOCK INSTALLATION on page 32.

lock section

15

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Installation Instructions and Owner’s Manual 8000 Series, ModelTorqueMaster Plus - Single and Double Spring Table of Contents Definition of key words used in this manualPackage Contents Door Section Identification Package Contents ContinuedRemoving an Existing Door Tools Requiredsuitable mounting pad to structurally Preparing the OpeningFailure to securely attach aINSTALLATION Installing Fully Adjustable Jamb Cutting Vertical Track andBrackets Attaching Fully Adjustable Flagangle to Vertical TrackBottom Bracket Drums Hinges Step Plate Top BracketU-Bar Lift Handle Bottom SectionVertically aligned Vertical Track Stacking SectionsINSTALLATION Vertical Track Alignment Top SectionAdjusting Top Brackets Horizontal TrackINSTALLATION Center Bracket Bushing TorqueMaster Spring TubeINSTALLATION Drum WrapsCable Drums Brackets End BracketsINSTALLATION securely attached to both EndSecuring Center Bracket Bushing NOTE: If you are not installing theassembly, follow these instructions bracket to the header usingTools Needed Securing Doorfor Spring Winding INSTALLATIONCable Adjustment INSTALLATION Winding Springsresult in door falling and Drum Wrap InstallationWinding Springs Continued Raising door further canINSTALLATION Rear SupportRear Support Continued READ THESE INSTRUCTIONS TorqueMaster Plus ResetATTEMPTING TO RESET THE InstructionsTorqueMaster Plus Reset Instructions ContinuedTorqueMaster Plus Reset Instructions ContinuedTools Needed Side Lock ROPE CAUSING SEVERE OR optional INSTALLATIONPull Rope FATAL INJURYTO TEST OR MAKE ANY Trolley OperatorMONTHLY THEREAFTER AS DESCRIBED IN YOUR AND OWNER’S MANUAL, TOCleaning maintenancePainting Limited Warranty Models 8000, 8100, 8200 and Thank you for your purchasePlease Do Not Return This Product To The Store
Related manuals
Manual 38 pages 21.46 Kb

46 specifications

Wayne-Dalton 46 is a prominent garage door model known for its unique combination of durability, aesthetic appeal, and advanced technology. Designed specifically for residential properties, this door offers homeowners an array of features that enhance the overall functionality and style of their garages.

One of the standout characteristics of the Wayne-Dalton 46 is its construction. Made with high-quality materials, these doors are crafted to withstand various weather conditions. They are built using a steel frame, which provides structural integrity and support, while the insulated core helps to maintain energy efficiency in the home. The insulation also minimizes noise from outside, creating a peaceful environment within the garage.

In terms of style, the Wayne-Dalton 46 offers multiple design options to suit different architectural preferences. Homeowners can choose from various panel styles and colors, allowing for customization that complements the exterior of their homes. The door can be finished with a smooth or textured surface, adding to its visual appeal. Additionally, the Wayne-Dalton 46 features decorative hardware options, providing a touch of elegance and sophistication.

Technological innovation is another key aspect of the Wayne-Dalton 46. Equipped with the latest in garage door technology, these doors come with advanced safety features, including pinch-resistant construction, which helps to prevent injuries during operation. The door’s reliable opening mechanism ensures smooth and quiet operation.

Wayne-Dalton also incorporates smart technology into the 46 model. Homeowners have the option to equip their garage doors with Wi-Fi connectivity, allowing them to control the door remotely via smartphone apps. This feature adds convenience and security, enabling users to monitor their garage door's status and receive alerts in real time.

Maintenance of the Wayne-Dalton 46 is straightforward, thanks to its durable finish, which resists rust and corrosion. Regular inspections and basic upkeep will ensure longevity, providing a reliable garage door solution for years to come.

Overall, the Wayne-Dalton 46 stands out in the market for its impressive blend of style, durability, advanced features, and safety technology, making it an excellent choice for homeowners looking to enhance the appeal and functionality of their garages.
Top Page Image Contents