Wayne-Dalton 46 installation instructions Horizontal Track, Adjusting Top Brackets, Installation

Page 17
Horizontal Track

 

 

 

 

15

 

Horizontal Track

 

 

 

 

 

 

Tools Needed:

To install horizontal track, place the curved end over the

9/16” Socket

top roller. Align the bottom of the horizontal track with

the vertical track. Hand tighten the horizontal track to

7/16” Socket

the flagangle with (2) 1/4”-20 x 5/8” carriage bolts and

(2) 1/4”-20 flange hex nuts.

 

Ratchet Wrench

Level the horizontal track assembly and bolt the horizontal

 

9/16” Wrench

angle to the slot in the flagangle using (1) 3/8”- 16 x 3/4”

hex head bolt and (1) 3/8”- 16 hex nut. Repeat for other

 

Level

side.

Tighten the remaining carriage bolts and nuts to complete

 

Hammer

the horizontal track installation.

Step Ladder

 

WARNING

 

DO NOT RAISE DOOR UNTIL HORIZONTAL TRACKS

 

 

ARE SECURED­ AT REAR, AS OUTLINED IN STEP

 

27, OR DOOR COULD FALL FROM OVERHEAD

 

POSITION­ CAUSING SEVERE OR FATAL INJURY.

 

Remove the nail that was temporarily holding the top section

 

in place, installed in Step 13.

 

IMPORTANT: Failure to remove nail before

 

attempting to raise door could cause permanent

 

damage to top section.

 

NOTE: If an idrive® opener will be installed, position

 

horizontal tracks slightly above level.

 

 

 

 

(2) 1/4”- 20 x 5/8” carriage bolts

flagangle

(2)1/4”-20 flange hex nuts

Horizontal

angle

Adjusting Top Brackets flagangle

(1) 3/8”-16

hex nut(1) 3/8-16 x 3/4” hex head bolt

INSTALLATION

16

Adjusting Top Brackets

 

HORIZONTAL

 

 

 

track

Tools Needed:

With horizontal tracks installed you can

top

 

7/16” Wrench

adjust the top brackets.

section

 

 

 

 

 

 

Step Ladder

Vertically align the top section with the

 

 

 

lower sections. Once aligned, position

 

 

 

the top roller in the top bracket slide out

 

 

 

against the horizontal track. Maintaining

 

 

 

the slide’s position, tighten 1/4”- 20

 

 

 

flange hex nut to secure the top bracket

 

 

 

slide to the top bracket base.

Correct

 

 

 

 

 

Repeat for other side.

 

TOP ROLLER

 

 

 

 

 

 

TOP BRACKET

 

 

top

SLIDE

 

 

section

 

top

section

incorrect

17

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your

local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com

Image 17
Contents TorqueMaster Plus - Single and Double Spring Installation Instructions and Owner’s Manual8000 Series, Model Table of Contents Definition of key words used in this manualPackage Contents Door Section Identification Package Contents ContinuedRemoving an Existing Door Tools RequiredFailure to Preparing the Openingsecurely attach a suitable mounting pad to structurallyINSTALLATION Brackets Installing Fully Adjustable JambCutting Vertical Track and Bottom Bracket Attaching Fully AdjustableFlagangle to Vertical Track Drums Hinges Step Plate Top BracketU-Bar Vertically aligned Lift HandleBottom Section INSTALLATION Vertical TrackStacking Sections Vertical Track Alignment Top SectionINSTALLATION Adjusting Top BracketsHorizontal Track Center Bracket Bushing TorqueMaster Spring TubeINSTALLATION Drum WrapsCable Drums INSTALLATION End Bracketssecurely attached to both End Bracketsassembly, follow these instructions NOTE: If you are not installing thebracket to the header using Securing Center Bracket Bushingfor Spring Winding Securing DoorINSTALLATION Tools NeededCable Adjustment INSTALLATION Winding SpringsWinding Springs Continued Drum Wrap InstallationRaising door further can result in door falling andINSTALLATION Rear SupportRear Support Continued ATTEMPTING TO RESET THE TorqueMaster Plus ResetInstructions READ THESE INSTRUCTIONSTorqueMaster Plus Reset Instructions ContinuedTools Needed TorqueMaster Plus ResetInstructions Continued Side Lock Pull Rope optional INSTALLATIONFATAL INJURY ROPE CAUSING SEVERE ORMONTHLY THEREAFTER AS DESCRIBED IN YOUR Trolley OperatorAND OWNER’S MANUAL, TO TO TEST OR MAKE ANYPainting Cleaningmaintenance Please Do Not Return This Product To The Store Limited Warranty Models 8000, 8100, 8200 andThank you for your purchase
Related manuals
Manual 38 pages 21.46 Kb

46 specifications

Wayne-Dalton 46 is a prominent garage door model known for its unique combination of durability, aesthetic appeal, and advanced technology. Designed specifically for residential properties, this door offers homeowners an array of features that enhance the overall functionality and style of their garages.

One of the standout characteristics of the Wayne-Dalton 46 is its construction. Made with high-quality materials, these doors are crafted to withstand various weather conditions. They are built using a steel frame, which provides structural integrity and support, while the insulated core helps to maintain energy efficiency in the home. The insulation also minimizes noise from outside, creating a peaceful environment within the garage.

In terms of style, the Wayne-Dalton 46 offers multiple design options to suit different architectural preferences. Homeowners can choose from various panel styles and colors, allowing for customization that complements the exterior of their homes. The door can be finished with a smooth or textured surface, adding to its visual appeal. Additionally, the Wayne-Dalton 46 features decorative hardware options, providing a touch of elegance and sophistication.

Technological innovation is another key aspect of the Wayne-Dalton 46. Equipped with the latest in garage door technology, these doors come with advanced safety features, including pinch-resistant construction, which helps to prevent injuries during operation. The door’s reliable opening mechanism ensures smooth and quiet operation.

Wayne-Dalton also incorporates smart technology into the 46 model. Homeowners have the option to equip their garage doors with Wi-Fi connectivity, allowing them to control the door remotely via smartphone apps. This feature adds convenience and security, enabling users to monitor their garage door's status and receive alerts in real time.

Maintenance of the Wayne-Dalton 46 is straightforward, thanks to its durable finish, which resists rust and corrosion. Regular inspections and basic upkeep will ensure longevity, providing a reliable garage door solution for years to come.

Overall, the Wayne-Dalton 46 stands out in the market for its impressive blend of style, durability, advanced features, and safety technology, making it an excellent choice for homeowners looking to enhance the appeal and functionality of their garages.