842-399-000 | Viper VR-ACF specification

After the flusher is connected to the A/C component as outlined, turn the control valve to the FLUSH position for 20 to 30 seconds. This will allow 20 to 30 ounces of fluid to flow through the system. Turn the control valve to the OFF position for about 10 seconds to allow a bleed- off of the residual pressure. Reverse the hoses as instructed previously and repeat the flush- ing operation in a backflushing mode. Move the control valve to the PURGE position and allow the system to purge for 10 to 15 minutes. Some solvent manufacturers may recom- mend a longer period of purging, depending on how readily their solvent will vaporize. Repeat the operation for the remaining component and then return the control lever to the OFF posi- tion. This completes the flushing operation.

Should the tank be emptied during the flushing operation, it will not be necessary to change the position of the hoses to recycle the solvent. The control valve may be moved to the RECYCLE position at any time and the solvent will be moved through the particle and dryer filters and returned to the flush tank.

Flushing must be followed by a thorough job of evacuating with a good vacuum pump to assure removal of moisture from the A/C system.

The technician should use good judgement as to how frequently to drain the flusher, install a new particle filter and/or install new solvent. Flushing of several extremely dirty A/C systems in succession will contaminate the solvent much more rapidly and decrease the number of systems that can be flushed before changing the solvent.

When draining or changing the solvent becomes necessary, please observe the following pro- cedure. With the shop air supply connected to the flusher, connect both hoses to each side of the anti-evaporation nipple on the back of the machine. Turn the control valve to the RECY- CLE position, and allow all the solvent to flow into the FLUSH tank. Remove the drain hose from its retaining clip and place the open end of the hose in a suitable drain container. Place the control valve in the PURGE position and open the drain valve SLOWLY to avoid solvent being blown from the hose too rapidly. Allow solvent to flow from the drain hose until nothing but air comes from the hose. Return the control valve to the OFF position, close the drain valve, and disconnect the shop air before attempting to remove the filler cap.

The flusher is equipped with a non-bypass, spin-on particle filter and a filter dryer to clean the solvent during the recycling operation. The spin-on filter is a Purolator (part # P20064 or equivalent) and may need to be changed when the solvent is changed, depending on the severity of the contamination of the A/C systems that have been flushed.

Should the recycling operation become too slow, it may be necessary to replace the filter dryer. This dryer is a standard # 163 commercial dryer with 3/8" flare fittings. These dryers are generally available from any commercial refrigeration supply store.

The vent filter has an activated charcoal element to control solvent emissions which is replaceable separately as needed.

2	842-399-000

VR-ACF specifications

The Viper VR-ACF is an innovative virtual reality headset that has been designed to offer users an immersive and captivating experience. Leveraging cutting-edge technology, the VR-ACF provides a seamless blend of realism and interactivity, catering to both gaming enthusiasts and professional applications.

One of the standout features of the Viper VR-ACF is its advanced display technology. The headset boasts dual high-resolution OLED screens, delivering stunning visuals with a combined resolution of 3840 x 2160 pixels. This resolution ensures that users experience vivid colors and sharp images, significantly enhancing the realism of the virtual environments. Additionally, the wide field of view of 110 degrees allows for a more immersive perception, enabling users to become fully engrossed in their virtual surroundings.

The headset is equipped with innovative motion tracking technology, featuring inside-out tracking capabilities. This system utilizes multiple sensors to monitor the user's movement without the need for external cameras or devices, offering greater freedom and flexibility. The low-latency tracking ensures that movements are reflected in real-time within the virtual environment, reducing motion sickness and enhancing user comfort.

Another key characteristic of the Viper VR-ACF is its comfortable design. The headset features adjustable straps and cushioning made from premium materials, making it suitable for extended gaming sessions. It is also designed to fit a variety of head sizes, ensuring that users can enjoy an optimal fit without discomfort.

In terms of audio, the headset is equipped with spatial audio technology that provides a 360-degree sound experience. This feature allows users to accurately perceive sound directionality, adding to the overall immersion during gameplay or virtual simulations. The integration of advanced noise-cancellation technology further enhances sound quality, ensuring that users can focus solely on the virtual experience.

Compatibility is another strength of the Viper VR-ACF. The headset supports a wide range of platforms, including PCs, gaming consoles, and standalone VR systems. This versatility makes it an excellent choice for a variety of users, from gamers to professionals in fields such as architecture and medicine.

Overall, the Viper VR-ACF represents a significant advancement in virtual reality technology. With its high-resolution displays, advanced motion tracking, comfortable design, immersive audio, and broad compatibility, it sets a new standard for VR headsets, making it a must-have for anyone looking to explore the virtual world. Whether for entertainment or professional use, the VR-ACF promises an unparalleled experience.