Vizio VZL-6011 instruction manual Dirt container and filter

Vax VZL-6011 User Guide.qxd:VZL-6011 User Guide 17/9/08 11:03 Page 7

NOTE: The filter housing also needs to be washed regularly with cold water and dried thoroughly before replacing and restarting the vacuum cleaner.

Remove exhaust filter

Press tab on side of exhaust cover and lift to remove.

Fig.5/7

Press tab on exhaust filter and lift filter out of base of cleaner (Fig.5/7).

Fig.5/8

Clean exhaust filter

Tap the exhaust filter on the inside of a rubbish bin to remove excess dust and dirt from filter.

Fig.5/9

Wash the exhaust filter under cold running water every 9 -12 months. Leave to dry for 24 hours before replacing in machine.

Vax Careline 0870 606 1248

Replace exhaust filter

Return exhaust filter to base of cleaner and snap into place.

Fig.5/10

Replace exhaust filter cover and snap into place to secure.

Fig.5/11

Replace dirt container

Return dirt container to cleaner. Align slot on bottom of dirt container with tab on cleaner. Push to snap into place.

Fig.5/12

*REGULAR MAINTENANCE: Each time the dirt container is emptied, the foam filter should be checked and when necessary, cleaned (Filter will be discolored after use, this will not affect the filter’s performance). Do not brush the filter. The cleaning instructions may vary depending on the dirt conditions. In some cases, more or less cleaning of the filter may be required.

dirt container and filter 7