Wayne 353601-001 specifications Description, Unpacking, Safety Guidelines

Page 1

Operating Instruction and Parts Manual

ESP45

 

 

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.

24-Volt Backup

Sump

Pump

Description

The ESP45 is a battery operated back-up sump pump. It does not replace a regular pump. It is designed to provide protection in the event household electrical power fails or main pump fails.

Unpacking

Inspect this unit before it is used. Occasionally, products are damaged during shipment. If the pump or components are damaged, return the unit to the place of purchase for replacement. Failure to do so could result in serious injury or death.

Safety Guidelines

This manual contains information that is very important to know and understand. This information is provided for SAFETY and to PREVENT EQUIPMENT PROBLEMS. To help recognize this information, observe the following symbols.

Danger indicates an imminently

General Safety

Information

CALIFORNIA PROPOSITION 65

This product or its power cord may

contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

GENERAL SAFETY

Do not use to pump flammable or explosive fluids such as gasoline, fuel oil, kerosene, etc. Do not use in a flammable and/or explosive atmosphere. Pump should only be used to pump clear water. Fatal injury and/or property damage could result.

If the basement has water or moisture on the floor, do not walk on wet area until all

power is turned off. If the shutoff box is in the basement, call an electrician. Remove pump and either repair or replace. Failure to follow this warning could result in fatal electrical shock.

All wiring must be performed by a

qualified electrician.

Do not expose battery to sparks or flames as an explosion or fire could result.

Battery acid is corrosive. Avoid spilling on skin or clothing. Eye protection must

be worn when handling the battery. A check valve must be used on the

primary sump pump discharge.

A ground fault circuit interrupter is required.

This pump must only be used to pump clear water. This pump is not designed to handle effluent, salt water, brine, laundry discharge or any other application which may contain caustic chemicals and/or foreign materials. Pump damage may occur if used in these applications and will void warranty.

hazardous situation which, if not avoided, will result in death or serious injury.

Warning indicates a potentially

hazardous situation which, if not avoided, could result in death or serious injury.

Caution indicates a potentially

hazardous situation which, if not avoided, may result in minor or moderate injury.

Notice indicates important

information, that if not followed, may cause damage to equipment.

Pump Specifications

Power supply requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120V, 60 Hz Motor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Perminent Magnet DC Motor Normal water removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2880 GPH @ 5 Feet @ 26V DC Liquid temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40°F to 120°F Circuit requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 amps AC (min) Pump Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 in. high x 8 3/4 in. base Pump run time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Seconds

Pump Construction

Motor housing, volute, seal plate

. . . . Cast Iron

Impeller

Thermoplastic

Shaft

Stainless Steel

Discharge

. . 11/2 in. NPT

Float switch

. . . Reed Style

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

© 2008 Wayne Water Systems

For parts, product & service information

353601-001 7/08

visit www.waynepumps.com

Image 1
Contents General Safety Information Safety GuidelinesDescription UnpackingPS/BC Features Battery InformationPump Installation Pump InstallationMethod 1 Preferred MethodControl Box Installation PS/BC InstallationMethods 1 Chart 2 PS/BC Status Lights On When Action Required MaintenanceOperation BatteriesSymptom Possible Causes Corrective Action Troubleshooting ChartPart No. Description Number Qty For Replacement Parts, callAttach Your Receipt Here Limited Warranty

353601-001 specifications

The Wayne 353601-001 is a state-of-the-art fuel dispenser that reflects a perfect blend of modern technology and user-friendly design, positioned to meet the evolving needs of the fuel retail industry. This dispenser is engineered for efficiency, reliability, and exceptional performance, making it an ideal choice for gas stations and convenience stores.

One of the standout features of the Wayne 353601-001 is its robust construction, designed to withstand the rigors of daily use in bustling service stations. The dispenser is equipped with weather-resistant components, ensuring durability and longevity in various environmental conditions. Its sleek design allows for easy maintenance, further enhancing its practicality for operators.

In terms of technology, the Wayne 353601-001 employs advanced electronic systems that facilitate precise fuel measurement and fast transaction processing. The unit incorporates advanced flow meter technology, which ensures accurate dispensing with minimal product loss. This precision not only fosters consumer trust but also enhances operational efficiency, ultimately impacting the profitability of the business.

The dispenser's interface is intuitive and user-friendly, featuring high-resolution displays that provide clear information to customers. The keypad is designed for easy navigation, and the touchscreen option allows for interactive features, including loyalty programs and promotional offers. This level of engagement can significantly enhance the customer experience, encouraging repeat business.

The Wayne 353601-001 also includes integration capabilities for various payment systems, supporting both traditional card transactions and modern contactless payment options. This versatility ensures that customers can complete their purchases conveniently, adapting to the shifts in consumer preferences towards digital payment methods.

Safety is a paramount consideration in the design of the Wayne 353601-001. It includes multiple safety features such as emergency shut-off systems, leak detection, and automatic shut-off valves that are in line with industry standards. These features not only protect the consumer but also safeguard the environment, aligning with best practices for fuel dispensing operations.

In summary, the Wayne 353601-001 stands out in the marketplace due to its combination of durability, advanced technology, user-centric design, and safety features. Whether enhancing consumer satisfaction or streamlining operational efficiency, this fuel dispenser is a reliable solution for the evolving demands of the fueling industry.