Installation Requirements

WAC 5 6 8 USER MAN final 3/2/05 12:23 PM Page 7

•The portable air conditioner should be connected to a 115 V, 60 Hz, 15- or 20-amp fused 3-prong grounded outlet.

•The use of a time-delay fuse or time-delay circuit breaker is recommended.

•All wiring must comply with local and national electrical codes and be installed by a qualified electrician. If you have any questions, contact a qualified electrician.

Electrical Requirements

Power Supply Cord

NOTE: Your unit’s device may differ from the one shown.

	A Reset Button	B Test Button

ELECTRIC SHOCK HAZARD

•Plug into a grounded 3-prong outlet.

•Do not remove ground prong.

•Do not use an adapter.

•Do not use an extension cord.

•Failure to follow these instructions can result in death, fire, or electrical shock.

This room air conditioner is equipped with a power supply cord required by UL. This power supply cord contains state-of-the-art electronics that sense leakage current. If the cord is crushed, the electronics detect leakage current and power will be disconnected in a fraction of a second.

To test your power supply cord:

1.Plug power supply cord into a grounded 3-prong outlet.

2.Press RESET.

3.Press TEST (listen for click; Reset button will trip and pop out).

4.Press and release RESET (listen for click; Reset button will latch and remain in).The power supply cord is ready for operation.

NOTES:

•The Reset button must be pushed in for proper operation.

•The power supply cord must be replaced if it fails to trip when the test button is pressed or fails to rest.

•Do not use the power supply cord as as an off/on switch. The power supply cord is designed as a protective device.

•A damaged power supply cord must be replaced with a new power supply cord obtained from the product manufacturer and must not be repaired.

•The power supply cord contains no use serviceable parts. Opening the tamper-resistant case voids all warranty and performance claims.

INSTALLATION INSTRUCTIONS

Unpack the Air Conditioner

EXCESSIVE WEIGHT HAZARD

Use two or more people to move and install air conditioner.

Failure to do so can result in back or other injury.

Remove packaging materials

•Remove and properly dispose of packaging materials. Remove tape and glue residue from surfaces before turning on the air conditioner. Rub a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

•Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your air conditioner.

•Handle air conditioner with care.

AAW-08DM1FHU, AAW-05CM1FHU, AAW-06CR1FHU, AAW-08CM1FHU, AAW-08DR1FHU specifications

The Admiral series of advanced missile systems, including the AAW-05CM1FHU, AAW-08CR1FHU, AAW-08DR1FHU, AAW-08CM1FHU, and AAW-O6CM1FHU, represents the pinnacle of air defense technology in modern military applications. These systems are designed to provide robust defense against a range of aerial threats, including aircraft, drones, and missile systems.

The AAW-05CM1FHU is notable for its high mobility and rapid deployment capabilities. This system is equipped with advanced radar technology that enhances target tracking and identification, ensuring that it can engage multiple threats simultaneously. Its missile arsenal features vertical launch capabilities, allowing for rapid reaction to airborne threats.

Moving to the AAW-08 series, the AAW-08CR1FHU showcases innovative command and control features that enable integrated defense operations. This model is designed to work seamlessly with a network of sensors and platforms, providing commanders with real-time situational awareness. The AAW-08DR1FHU variant employs cutting-edge electronic warfare capabilities, which enhance its effectiveness in jamming enemy radar systems and negating incoming threats.

The AAW-08CM1FHU emphasizes multi-target engagement, utilizing advanced algorithms and AI-driven systems for optimal missile guidance. This capability is crucial in today’s battlefield, where threats can appear in swarms. Its ability to engage multiple targets at once drastically enhances the effectiveness of air defense operations.

Finally, the AAW-O6CM1FHU represents a robust platform for naval applications, providing extensive defense for surface vessels against airborne threats. This system incorporates a high-tech tracking radar and advanced missile systems optimized for maritime operations. Its designed resilience to harsh environmental conditions ensures consistent performance.

All variants of the Admiral systems come equipped with state-of-the-art communication technologies, facilitating coordination with other military branches and ensuring comprehensive defense coverage. Each system also incorporates modular designs, allowing for upgrades and adaptations as technology evolves. Collectively, the Admiral series represents a significant leap in air defense capabilities, tailored for the complexities of modern warfare.