Genie GS-1932, GS-1930, CE, GS-1530, GS-1532 manual Pre-operation Inspection, Fundamentals

Page 14

Operator's Manual

Third Edition • Second Printing

 

 

 

 

Pre-operation Inspection

Do Not Operate Unless:

You learn and practice the principles of safe machine operation contained in this operator's manual.

1Avoid hazardous situations.

2Always perform a pre-operation inspection.

Know and understand the pre-operation inspection before going on to the next section.

3Always perform function tests prior to use.

4Inspect the workplace.

5Only use the machine as it was intended.

Fundamentals

It is the responsibility of the operator to perform a pre-operation inspection and routine maintenance.

The pre-operation inspection is a visual inspection performed by the operator prior to each work shift. The inspection is designed to discover if anything is apparently wrong with a machine before the operator performs the function tests.

The pre-operation inspection also serves to determine if routine maintenance procedures are required. Only routine maintenance items specified in this manual may be performed by the operator.

Refer to the list on the next page and check each of the items.

If damage or any unauthorized variation from factory delivered condition is discovered, the machine must be tagged and removed from service.

Repairs to the machine may only be made by a qualified service technician, according to the manufacturer's specifications. After repairs are completed, the operator must perform a pre-operation inspection again before going on to the function tests.

Scheduled maintenance inspections shall be performed by qualified service technicians, according to the manufacturer's specifications and the requirements listed in the responsibilities manual.

12

GS-1530 • GS-1532 • GS-1930 • GS-1932

Part No.1000032

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsPart No.1000032 GS-1530 GS-1532 GS-1930 GS-1932 Safety Rules Fall Hazards Collision HazardsExplosion and Fire Hazard Crushing HazardsComponent Damage Hazard Damaged Machine HazardsTip-over Hazard Battery Safety Burn HazardsExplosion Hazards Lifting HazardDecal Legend Page Controls Platform ControlsGround Control Panel Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionObserve and Obey MaintenanceMaintenance Symbols Legend Check the Hydraulic Oil LevelScheduled Maintenance Check the BatteriesTest Emergency Stop Function TestsAt the Ground Controls Test the Up/Down Functions Test the Function Enable SwitchAt the Platform Controls Test the Auxiliary LoweringTest the Tilt Sensor Operation Test the SteeringTest Drive and Braking Test Limited Drive Speed Test the Pothole GuardsWorkplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedOperation From Ground Emergency StopAuxiliary Lowering Operation From PlatformTo determine the slope grade To DriveDriving on a slope How to use the Safety Arm Error Indicator ReadoutBattery Level Indicator To Extend and Retract PlatformDry Battery Filling Charging Instructions Battery and Charger Instructions Observe and ObeyTo Charge Battery Maintenance free batteriesDecals Decal InspectionGround Battery Controls Side Third Edition Second Printing Operators ManualTransport and Lifting Instructions Brake Release OperationLifting Instructions AxisSecuring to Truck or Trailer for Transit Specifications Model GS-1530Specifications Model GS-1532 Model GS-1932
Related manuals
Manual 34 pages 55.39 Kb

GS-1932, GS-1532, GS-1930, GS-1530, CE specifications

The Genie GS series includes several electric scissor lifts, specifically the GS-1530, GS-1532, GS-1932, and GS-1930 models, designed for indoor use in various applications like construction, maintenance, and warehousing. Each model offers a robust set of features and technologies that cater to different working heights and space constraints.

The Genie GS-1530 is compact and ideal for navigating tight spaces, featuring a working height of up to 15 feet and a platform capacity of 500 pounds. It is equipped with non-marking tires, making it suitable for indoor operations without damaging floors. The GS-1530 is lightweight, allowing for easy transport and maneuverability, especially in crowded job sites.

The GS-1532 offers a slightly higher working height of 15 feet, with a larger platform that can accommodate up to 500 pounds. It includes an extension deck feature that provides additional workspace when needed, ensuring operational flexibility. Its narrow width and tight turning radius enhance its usability in constrained environments.

For users needing greater reach, the GS-1930 boasts a working height of up to 19 feet and a platform capacity of 500 pounds. It is designed with advanced battery technology for extended run times, enabling operators to work longer hours without needing a recharge. The GS-1930 can also quickly be transported between job sites or moved within larger facilities due to its compact design.

The GS-1932 further expands the capabilities with a larger platform and similar height of up to 19 feet. It features an innovative control system that allows for easy operation, even in complex settings. With its auto-levelling capabilities, the GS-1932 is equipped to handle uneven ground, making it versatile for various applications.

The CE versions of these models are tailored to meet European standards for safety and performance. They include features such as lowering speed control and emergency stop buttons, ensuring operator safety in various work environments. All models are designed with durability in mind and come with a range of maintenance-friendly features.

In conclusion, the Genie GS series showcases advanced engineering, user-friendly technology, and impressive lifting performance, making them suitable for a wide range of indoor applications. Their compact designs, combined with significant platform capacity, ensure that they meet the demands of modern workplaces. Whether for maintenance tasks or construction projects, the Genie GS models provide reliable solutions tailored to the needs of users.
Top Page Image Contents