Genie CE, GS-1930 Observe and Obey, Check the Hydraulic Oil Level, Maintenance Symbols Legend

Page 16

Operator's Manual

Third Edition • Second Printing

 

 

 

 

Maintenance

Observe and Obey:

Only routine maintenance items specified in this manual shall be performed by the operator.

Scheduled maintenance inspections shall be completed by qualified service technicians, according to the manufacturer's specifications and the requirements specified in the responsibilities manual.

Maintenance Symbols Legend

The following symbols have been used in this manual to help communicate the intent of the instructions. When one or more of the symbols appear at the beginning of a maintenance procedure, it conveys the meaning below.

Indicates that tools will be required to perform this procedure.

Indicates that new parts will be required to perform this procedure.

Check the Hydraulic Oil Level

Maintaining the hydraulic oil at the proper levels is essential to machine operation. Improper hydraulic oil levels can damage hydraulic components. Daily checks allow the inspector to identify changes in oil level that might indicate the presence of hydraulic system problems.

Perform this procedure with the platform in the stowed position.

1Visually inspect the oil level in the hydraulic tank.

Result: The hydraulic oil level should be as marked on the tank.

2 Add oil if necessary. Do not overfill.

Hydraulic oil specifications

Hydraulic oil type

Chevron Rykon

 

Premium MV equivalent

 

 

14

GS-1530GS-1532GS-1930GS-1932

Part No.1000032

Image 16
Contents Operator’s Manual Contents Contact usSafety Rules Do Not Operate UnlessElectrocution Hazards Tip-over HazardsPart No.1000032 GS-1530 GS-1532 GS-1930 GS-1932 Safety Rules Fall Hazards Collision HazardsCrushing Hazards Component Damage HazardExplosion and Fire Hazard Damaged Machine HazardsBattery Safety Burn Hazards Explosion HazardsTip-over Hazard Lifting HazardDecal Legend Page Controls Platform ControlsGround Control Panel Pre-operation Inspection FundamentalsPre-operation Inspection PRE-OPERATION InspectionMaintenance Maintenance Symbols LegendObserve and Obey Check the Hydraulic Oil LevelScheduled Maintenance Check the BatteriesAt the Ground Controls Function TestsTest Emergency Stop Test the Function Enable Switch At the Platform ControlsTest the Up/Down Functions Test the Auxiliary LoweringTest Drive and Braking Test the SteeringTest the Tilt Sensor Operation Test Limited Drive Speed Test the Pothole GuardsWorkplace Inspection Workplace InspectionOperating Instructions Only use the machine as it was intendedEmergency Stop Auxiliary LoweringOperation From Ground Operation From PlatformDriving on a slope To DriveTo determine the slope grade Error Indicator Readout Battery Level IndicatorHow to use the Safety Arm To Extend and Retract PlatformBattery and Charger Instructions Observe and Obey To Charge BatteryDry Battery Filling Charging Instructions Maintenance free batteriesDecals Decal InspectionGround Battery Controls Side Third Edition Second Printing Operators ManualTransport and Lifting Instructions Brake Release OperationLifting Instructions AxisSecuring to Truck or Trailer for Transit Specifications Model GS-1530Specifications Model GS-1532 Model GS-1932
Related manuals
Manual 34 pages 55.39 Kb

GS-1932, GS-1532, GS-1930, GS-1530, CE specifications

The Genie GS series includes several electric scissor lifts, specifically the GS-1530, GS-1532, GS-1932, and GS-1930 models, designed for indoor use in various applications like construction, maintenance, and warehousing. Each model offers a robust set of features and technologies that cater to different working heights and space constraints.

The Genie GS-1530 is compact and ideal for navigating tight spaces, featuring a working height of up to 15 feet and a platform capacity of 500 pounds. It is equipped with non-marking tires, making it suitable for indoor operations without damaging floors. The GS-1530 is lightweight, allowing for easy transport and maneuverability, especially in crowded job sites.

The GS-1532 offers a slightly higher working height of 15 feet, with a larger platform that can accommodate up to 500 pounds. It includes an extension deck feature that provides additional workspace when needed, ensuring operational flexibility. Its narrow width and tight turning radius enhance its usability in constrained environments.

For users needing greater reach, the GS-1930 boasts a working height of up to 19 feet and a platform capacity of 500 pounds. It is designed with advanced battery technology for extended run times, enabling operators to work longer hours without needing a recharge. The GS-1930 can also quickly be transported between job sites or moved within larger facilities due to its compact design.

The GS-1932 further expands the capabilities with a larger platform and similar height of up to 19 feet. It features an innovative control system that allows for easy operation, even in complex settings. With its auto-levelling capabilities, the GS-1932 is equipped to handle uneven ground, making it versatile for various applications.

The CE versions of these models are tailored to meet European standards for safety and performance. They include features such as lowering speed control and emergency stop buttons, ensuring operator safety in various work environments. All models are designed with durability in mind and come with a range of maintenance-friendly features.

In conclusion, the Genie GS series showcases advanced engineering, user-friendly technology, and impressive lifting performance, making them suitable for a wide range of indoor applications. Their compact designs, combined with significant platform capacity, ensure that they meet the demands of modern workplaces. Whether for maintenance tasks or construction projects, the Genie GS models provide reliable solutions tailored to the needs of users.