Genie GS-1530, GS-1930, CE, GS-1532, GS-1932 manual Check the Batteries, Scheduled Maintenance

Page 17

Third Edition • Second Printing

Operator's Manual

 

 

 

 

Check the Batteries

Proper battery condition is essential to good machine performance and operational safety. Improper fluid levels or damaged cables and connections can result in component damage and hazardous conditions.

This procedure does not need to be performed on machines with sealed or maintenance-free batteries.

Electrocution hazard. Contact with hot or live circuits may result in death or serious injury. Remove all rings, watches and other jewelry.

Bodily injury hazard. Batteries contain acid. Avoid spilling or contacting battery acid. Neutralize battery acid spills with baking soda and water.

Perform this test after fully charging the batteries.

1Put on protective clothing and eye wear.

2Be sure that the battery cable connections are tight and free of corrosion.

3Be sure that the battery hold-down bars are in place and secure.

4Remove the battery vent caps.

5Check the battery acid level of each battery. If needed, replenish with distilled water to the bottom of the battery fill tube. Do not overfill.

6Install the vent caps.

MAINTENANCE

Scheduled Maintenance

Maintenance performed quarterly, annually and every two years must be completed by a person trained and qualified to perform maintenance on this machine according to the procedures found in the service manual for this machine.

Machines that have been out of service for more than three months must receive the quarterly inspection before they are put back into service.

Part No.1000032

GS-1530GS-1532GS-1930GS-1932

15

Image 17
Contents Operator’s Manual Contact us ContentsDo Not Operate Unless Safety RulesTip-over Hazards Electrocution HazardsPart No.1000032 GS-1530 GS-1532 GS-1930 GS-1932 Safety Rules Collision Hazards Fall HazardsComponent Damage Hazard Crushing HazardsExplosion and Fire Hazard Damaged Machine HazardsExplosion Hazards Battery Safety Burn HazardsTip-over Hazard Lifting HazardDecal Legend Page Platform Controls ControlsGround Control Panel Fundamentals Pre-operation InspectionPRE-OPERATION Inspection Pre-operation InspectionMaintenance Symbols Legend MaintenanceObserve and Obey Check the Hydraulic Oil LevelCheck the Batteries Scheduled MaintenanceTest Emergency Stop Function TestsAt the Ground Controls At the Platform Controls Test the Function Enable SwitchTest the Up/Down Functions Test the Auxiliary LoweringTest the Tilt Sensor Operation Test the SteeringTest Drive and Braking Test the Pothole Guards Test Limited Drive SpeedWorkplace Inspection Workplace InspectionOnly use the machine as it was intended Operating InstructionsAuxiliary Lowering Emergency StopOperation From Ground Operation From PlatformTo determine the slope grade To DriveDriving on a slope Battery Level Indicator Error Indicator ReadoutHow to use the Safety Arm To Extend and Retract PlatformTo Charge Battery Battery and Charger Instructions Observe and ObeyDry Battery Filling Charging Instructions Maintenance free batteriesDecal Inspection DecalsThird Edition Second Printing Operators Manual Ground Battery Controls SideBrake Release Operation Transport and Lifting InstructionsAxis Lifting InstructionsSecuring to Truck or Trailer for Transit Model GS-1530 SpecificationsSpecifications Model GS-1532 Model GS-1932
Related manuals
Manual 34 pages 55.39 Kb

GS-1932, GS-1532, GS-1930, GS-1530, CE specifications

The Genie GS series includes several electric scissor lifts, specifically the GS-1530, GS-1532, GS-1932, and GS-1930 models, designed for indoor use in various applications like construction, maintenance, and warehousing. Each model offers a robust set of features and technologies that cater to different working heights and space constraints.

The Genie GS-1530 is compact and ideal for navigating tight spaces, featuring a working height of up to 15 feet and a platform capacity of 500 pounds. It is equipped with non-marking tires, making it suitable for indoor operations without damaging floors. The GS-1530 is lightweight, allowing for easy transport and maneuverability, especially in crowded job sites.

The GS-1532 offers a slightly higher working height of 15 feet, with a larger platform that can accommodate up to 500 pounds. It includes an extension deck feature that provides additional workspace when needed, ensuring operational flexibility. Its narrow width and tight turning radius enhance its usability in constrained environments.

For users needing greater reach, the GS-1930 boasts a working height of up to 19 feet and a platform capacity of 500 pounds. It is designed with advanced battery technology for extended run times, enabling operators to work longer hours without needing a recharge. The GS-1930 can also quickly be transported between job sites or moved within larger facilities due to its compact design.

The GS-1932 further expands the capabilities with a larger platform and similar height of up to 19 feet. It features an innovative control system that allows for easy operation, even in complex settings. With its auto-levelling capabilities, the GS-1932 is equipped to handle uneven ground, making it versatile for various applications.

The CE versions of these models are tailored to meet European standards for safety and performance. They include features such as lowering speed control and emergency stop buttons, ensuring operator safety in various work environments. All models are designed with durability in mind and come with a range of maintenance-friendly features.

In conclusion, the Genie GS series showcases advanced engineering, user-friendly technology, and impressive lifting performance, making them suitable for a wide range of indoor applications. Their compact designs, combined with significant platform capacity, ensure that they meet the demands of modern workplaces. Whether for maintenance tasks or construction projects, the Genie GS models provide reliable solutions tailored to the needs of users.