Chauvet color ado1ip user manual ID Addressing, Lens Replacement, Master/Slave Connectivity

Page 11

Setup

Master/Slave

Connectivity

ID Addressing

Lens Replacement

Procedure

The Master/Slave mode allows a COLORado™ 1 IP fixture to control one or more COLORado™ 1 IP fixtures without a DMX controller. The controlling fixture becomes the “master” when running an Auto or Custom program as well as when in STATIC mode. The controlled fixtures are the “slaves” and you must set them to “SLAVE” mode from their respective control panels. During the Master/Slave operation, the slave fixtures will operate in unison with the master fixture.

The master and slave fixtures link to each other using the standard DMX serial connection. If you are not familiar with the Master/Slave connectivity, you may download the “DMX Primer” document from the CHAUVET® Web site.

DO NOT connect a DMX controller to the fixtures operating in Master/Slave mode. Otherwise, the signals from the DMX controller may interfere with the signals from the master unit.

The Operation chapter of this manual provides detailed instructions on how to configure the Master and Slave units.

The COLORado™ 1 IP uses the ID Addressing feature to increase the number of addressable fixtures in the same DMX universe when in the TOUR personality. Refer to the Operation chapter in this manual to learn in detail how to configure the COLORado™ 1 IP fixtures when using ID Addressing. If you are not familiar with the various connection methods when using ID Addressing, you may download the “DMX Primer” document from the CHAUVET® Web site.

The COLORado™ 1 IP comes with the 15° lens assembly pre-installed from the factory. However, there is an optional lens kit (CLENS3042) available as an accessory, which will alter the beam angle of the fixture to 30º.

Follow the instructions below to to change or replace the LED lens assembly.

a)Disconnect the fixture from the AC power before opening it.

b)This procedure gives you direct access to the LEDs, which are very fragile. Use maximum care when handling the lenses over the LED assembly.

The numbers in parenthesis in the procedure below correspond to the parts indicated in the Exploded View section of the Technical Information chapter.

a)Remove the gel frame holder by removing the four Phillips screws (not shown).

b)Remove the front cover (1) by removing the eight Allen screws that hold it in place.

c)Remove the rubber seal (2) and the glass cover (3). The rubber seal may be a separate ring or it may come mounted around the glass cover. Use caution, because the glass is loose under the front cover and it may fall.

d)After removing the glass cover, remove the Phillips #2 screws that hold the lens assembly in place.

e)Remove the existing lens assembly and replace it with the new lens assembly.

f)Reverse the process to complete the lens replacement.

After replacing the lenses, make sure that the fixture is completely sealed (IP66 rating) before installing it outdoors. Otherwise, you will void the fixture’s warranty and risk damaging the fixture permanently.

COLORado™ 1 IP User Manual Rev. 01c

-7-

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Author Editor Manager PD Manager Edition NotesTable of Contents Table of Contents Unpacking Instructions What is IncludedBefore You Begin Icon MeaningExpected LED Lifespan Safety NotesProduct Description FeaturesAdditional Features Options IntroductionDMX Channel Summary Product Overview DMX Linking SetupAC Power AC Plug Power Linking Fuse ReplacementMaster/Slave Connectivity Lens ReplacementDisconnect the fixture from the AC power before opening it ID AddressingOrientation Rigging MountingDMX Personality DMX Control Without ID Addressing OperationControl Options Programming Control Panel DescriptionFrom previous Upload failed due to an error Setting DescriptionWhen R, G, and B are 255, the output will be at its maximum When R, G, and B are 255, CAL2 will determine the outputGo to SET Rest Reset Whites Setting White CalibrationTour Notes Menu Map DMX Values ARC2 + D TourARC1 + D No function Channel Function Value Percent/Setting HueARC2 + S ~100%Technical Information General MaintenanceSymptom Causes Actions Troubleshooting GuideExploded View Photometrics Claims Returns ProcedureTechnical Specifications Chauvet

color ado1ip specifications

Chauvet Color Ado1IP is a premier product designed for lighting professionals seeking versatility and reliability in various applications. This innovative fixture brings together advanced technologies and a host of features that make it a standout in Chauvet's product lineup.

One of the key features of the Color Ado1IP is its IP65 rating, ensuring that the fixture is fully protected against dust and water. This makes it an ideal choice for outdoor events, concerts, and festivals, where weather conditions can be unpredictable. Its robust construction allows it to withstand the rigors of outdoor use, while still delivering exceptional performance.

The Color Ado1IP boasts a powerful LED array capable of producing a wide spectrum of colors. With its RGBW color mixing, users can create everything from soft pastel shades to vibrant hues, effortlessly adapting to the ambiance of any environment. This versatility is complemented by the fixture's high output, ensuring that no matter the venue size, the lighting will have a significant visual impact.

Another notable characteristic of the Color Ado1IP is its advanced control options. The fixture supports DMX protocol, allowing users to integrate it seamlessly into larger lighting systems. Additionally, it offers stand-alone mode with pre-programmed chase effects, providing flexibility for setups that do not require complex control.

In terms of operational efficiency, the Color Ado1IP includes a built-in battery that provides exceptional runtime, making it suitable for mobile applications where power sources may be limited. This feature, combined with quick-set adjustments, allows for easy deployment and repositioning during events.

Furthermore, the fixture incorporates a silent operation feature, which is crucial for environments where noise levels must be kept minimal, such as theaters or intimate performances. This attention to detail enhances the user experience and ensures that lighting complements the overall atmosphere.

In summary, Chauvet Color Ado1IP exemplifies the perfect blend of durability, performance, and versatility. Its IP65 rating, powerful LED color mixing capabilities, advanced control options, and silent operation make it an outstanding choice for both outdoor and indoor events. Whether for rental companies, production teams, or venues looking to upgrade their lighting setups, the Color Ado1IP stands as a reliable solution to meet the evolving needs of the lighting industry.
Top Page Image Contents