Chauvet color ado1ip Setup, AC Power, DMX Linking, AC Plug Power Linking Fuse Replacement

Page 10

Setup

3. Setup

AC Power

AC Plug

Power Linking

Fuse Replacement

DMX Linking

DMX Modes

The COLORado™ 1 IP has an auto-ranging power supply that can work with an input voltage range of 100~240 VAC, 50/60 Hz.

Make sure that you are connecting this product to the proper voltage, as per the specifications in this guide, the product’s user manual, or on the product’s sticker.

Always connect the COLORado™ 1 IP to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.

To determine the power requirements for the COLORado™ 1 IP see the label affixed to the side of the fixture. Alternatively, you may refer to the corresponding specifications chart in the Technical Information chapter of this manual.

The listed current rating indicates the maximum current draw during normal operation. For more information, you may download the “Sizing the Circuit Breakers” document from the CHAUVET® Web site.

Never connect the COLORado™ 1 IP to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

Each COLORado™ 1 IP has IP66 rated cords for Power In and Power Out with proprietary IP66 connectors. These power cords access the sealed body of the fixture through IP66 cable glands. To allow connection to power outlets, the fixture comes with a power input cord with a proprietary IP66 connector on one end and an Edison plug on the other end (US market). In case you need to replace the Edison plug on the power input cord, follow the table below.

Connection

Wire (US)

Wire (Europe)

IP66 Pin

Screw Color

 

 

 

 

 

AC Live

Black

Brown

1

Yellow or Brass

 

 

 

 

 

AC Neutral

White

Blue

2

Silver

 

 

 

 

 

AC Ground

Green/Yellow

Green/Yellow

3

Green

 

 

 

 

 

The COLORado™ 1 IP supports power linking for up to 12 other COLORado™ 1 IP fixtures at 120 VAC. The fixture also comes with an IP66 power linking cord to allow direct connection between fixtures.

The COLORado™ 1 IP fixture has no external fuse that the user can change. However, it does have an internal fuse that only an authorized CHAUVET® technician should change.

You may link any COLORado™ 1 IP fixture to a DMX controller using a standard DMX serial connection. If using other DMX compatible fixtures with a COLORado™ 1 IP fixture, it is possible to control them individually with a single DMX controller.

If you are not familiar with the DMX standard, or if you need information about the DMX cables needed to link the COLORado™ 1 IP fixture to a DMX controller, you may download the “DMX Primer” document from the CHAUVET® Web site.

The COLORado™ 1 IP comes with two adapter cables, one from proprietary IP66 to 3-pin DMX In and the other from proprietary IP66 to 3-pin DMX Out. In addition, it comes with a signal linking cable with proprietary IP66 connectors on both ends.

The COLORado™ 1 IP uses the standard DMX data connection for its DMX modes, TOUR, ARC1, AR1 + D, ARC2, AR2 + D, AR2 + S, and HSV.

You will find information about these DMX modes in the Introduction chapter (brief description), the Operation Instructions chapter (configuration details), and the DMX Values section (individual channel values).

-6-

COLORado™ 1 IP User Manual Rev. 01c

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Edition Notes Author Editor Manager PD ManagerTable of Contents Table of Contents Icon Meaning What is IncludedBefore You Begin Unpacking InstructionsSafety Notes Expected LED LifespanIntroduction FeaturesAdditional Features Options Product DescriptionDMX Channel Summary Product Overview AC Plug Power Linking Fuse Replacement SetupAC Power DMX LinkingID Addressing Lens ReplacementDisconnect the fixture from the AC power before opening it Master/Slave ConnectivityMounting Orientation RiggingControl Panel Description OperationControl Options Programming DMX Personality DMX Control Without ID AddressingFrom previous When R, G, and B are 255, CAL2 will determine the output Setting DescriptionWhen R, G, and B are 255, the output will be at its maximum Upload failed due to an errorReset Whites Setting White Calibration Go to SET RestTour Notes Menu Map DMX Values ARC1 + D TourARC2 + D ~100% Channel Function Value Percent/Setting HueARC2 + S No functionGeneral Maintenance Technical InformationTroubleshooting Guide Symptom Causes ActionsExploded View Photometrics Returns Procedure ClaimsTechnical Specifications Chauvet

color ado1ip specifications

Chauvet Color Ado1IP is a premier product designed for lighting professionals seeking versatility and reliability in various applications. This innovative fixture brings together advanced technologies and a host of features that make it a standout in Chauvet's product lineup.

One of the key features of the Color Ado1IP is its IP65 rating, ensuring that the fixture is fully protected against dust and water. This makes it an ideal choice for outdoor events, concerts, and festivals, where weather conditions can be unpredictable. Its robust construction allows it to withstand the rigors of outdoor use, while still delivering exceptional performance.

The Color Ado1IP boasts a powerful LED array capable of producing a wide spectrum of colors. With its RGBW color mixing, users can create everything from soft pastel shades to vibrant hues, effortlessly adapting to the ambiance of any environment. This versatility is complemented by the fixture's high output, ensuring that no matter the venue size, the lighting will have a significant visual impact.

Another notable characteristic of the Color Ado1IP is its advanced control options. The fixture supports DMX protocol, allowing users to integrate it seamlessly into larger lighting systems. Additionally, it offers stand-alone mode with pre-programmed chase effects, providing flexibility for setups that do not require complex control.

In terms of operational efficiency, the Color Ado1IP includes a built-in battery that provides exceptional runtime, making it suitable for mobile applications where power sources may be limited. This feature, combined with quick-set adjustments, allows for easy deployment and repositioning during events.

Furthermore, the fixture incorporates a silent operation feature, which is crucial for environments where noise levels must be kept minimal, such as theaters or intimate performances. This attention to detail enhances the user experience and ensures that lighting complements the overall atmosphere.

In summary, Chauvet Color Ado1IP exemplifies the perfect blend of durability, performance, and versatility. Its IP65 rating, powerful LED color mixing capabilities, advanced control options, and silent operation make it an outstanding choice for both outdoor and indoor events. Whether for rental companies, production teams, or venues looking to upgrade their lighting setups, the Color Ado1IP stands as a reliable solution to meet the evolving needs of the lighting industry.
Top Page Image Contents