Liebherr 7084000-01, HC 1011/1060 General safety information, Contents, Setting up the appliance

Models: 20707 7084000-01 HC 1001/1050 HC 1011/1060

1 14
Download 14 pages 14.28 Kb
Page 2
Image 2
General safety information

General safety information

Contents

 

1

General safety information

2

2

Setting up the appliance

2

3

Changing the door hinges

3

3.1

To detach the soft stop mechanism

3

3.2

Reversing the door

3

3.3

Re-attaching the soft stop mechanism

3

4

Kitchen Cabinet Construction

4

4.1

Kitchen Cabinet Airflow

4

4.2

Designing the Kitchen Cabinet

5

4.3

Designing the Kitchen Cabinet Doors

6

5

Water supply

8

6

Installation

8

6.1

Assembling the appliance

9

6.2

Fitting the unit doors

11

7

Connecting the appliance

13

The manufacturer is constantly working to improve all models. Therefore please understand that we reserve the right to make design, equipment and technical modifications.

To get to know all the benefits of your new appliance, please read the information contained in these instructions carefully.

The instructions apply to several models, so there may be differences. Sections which only apply to certain appliances are indicated with an asterisk (*).

Instructions for action are marked with a Contents, the results of action are marked with a Changing the door hinges.

1 General safety information

Read and follow these instructions. They contain safety advice which is important for safe and problem-free installation and operation. Always read and follow the safety advice.

 

 

DANGER

 

indicates a hazardous situation,

 

 

 

 

 

which if not avoided, will result in

 

 

 

 

 

death or serious injury.

 

 

 

 

 

 

 

 

 

WARNING

 

indicates a hazardous situation,

 

 

 

 

 

which if not avoided, could result in

 

 

 

 

 

death or serious injury.

 

 

 

 

 

 

 

 

 

CAUTION

 

indicates a hazardous situation,

 

 

 

 

 

which if not avoided, will result in

 

 

 

 

 

minor or moderate injury.

 

 

 

 

 

 

 

 

 

NOTICE

 

indicates a hazardous situation,

 

 

 

 

 

which if not avoided, could result in

 

 

 

 

 

damage to property.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

indicates useful advice and tips.

 

 

 

 

 

 

 

It is important that the guidelines and instructions in this manual are followed so that the appliance is correctly

installed and operates properly. Read and understand all information in this manual before the appliance is installed.

2 Setting up the appliance

WARNING

Risk of fire due to moisture!

If live parts or the power cord get wet, this can cause a short circuit.

u The appliance is designed for use in enclosed spaces. Do not operate the appliance in open space or in damp areas or where there is spray.

WARNING

Danger of fire and damage!

u Do not place devices that give off heat, e.g. microwaves, toasters, etc. on the appliance.

Kitchen Cabinet Construction CAUTION Risk of personal injury!

u Have two people move this appliance into place.

NOTICE

Risk of damage caused by condensation

Installing the appliance next to any other refrigerator or freezer can cause damage or condensation to the Liebherr appliance.

u Do not install this appliance next to any other refrigerator or freezer except another Liebherr model. Liebherr models are designed to allow side-by-side installation. They are equipped with a heating system to eliminate condensation when refrigerators or freezers are installed side-by-side.

NOTICE

Risk of damage for the finished floor surface!

u Protect the finished floor surface before you uncrate the unit.

Verify that:

q the floor under the appliance is flat and level.

q the floor can support the appliance's weight plus approximately 1200 pounds (544 kg) of food weight.

q the appliance is not placed in direct sunlight or near the stove, range top, radiators and similar heat sources.

q the kitchen cabinet that the appliance is installed in is shimmed to the floor level if the floor heights are not equal.

q cutout dimensions are accurate.

q electrical outlet is in correct location.

q the air flow is not restricted. Air flow must be provided for the appliance to operate properly. The factory air vents provide 31 square inches (200 cm2) of air flow per appliance. If you are replacing the air vents with an overlay, the air flow must be the same or greater than the factory air vents.

2

Page 2
Image 2
Liebherr 7084000-01, HC 1011/1060 General safety information, Contents, Setting up the appliance, Changing the door hinges