Liebherr HC 1001/1050 Designing the Kitchen Cabinet, Kitchen Cabinet Construction, Power cord

Kitchen Cabinet Construction

u Insert ventilation grille Fig. 6 (3) into the cabinet base cut- out Fig. 6 (1).

u From the back side, slide the snap-fits Fig. 6 (2) into the grille until the hooks make contact with the cabinet base. u Completely mount cabinet base (with ventilation grille

and snap-fits) to kitchen cabinet.

4.2 Designing the Kitchen Cabinet

Install the appliance in stable kitchen cabinets only.

Fig. 6

u In the cabinet base, cut out a ventilation opening that is 17-23/32 in. (450 mm) in width and 2-7/32 in. (56 mm) in height.

Fig. 6		3	Electrical outlet
1	Power cord
2	Level	4	Fish line for power cord
A	21-7/32 in. (539 mm)			B	69-21/32 in. (1769.5 mm)
C	21-15/16 in. (557 mm)			D	69-3/4 in. - 70-3/8 in. (1772 mm) - (1788 mm)
E	24 in. (609.6 mm) (American Style Cabinet)			F	21-21/32 in. (550 mm)
	23-5/8 in. (600 mm) (European Style Cabinet)			G	1-1/2 in. (38 mm)
H	27-3/8 in. (695 mm)			J	24-3/4 in. (629 mm)
K	max. 3/4 in. (19 mm)			L	9-21/32 in. (245 mm)

u Construct the kitchen cabinet using the dimensions shown in Fig. 6.

u Align the kitchen cabinet with a level Fig. 6 (2) and a square. If necessary, shim underneath the cabinet to make it level.

5