Connecting the appliance
7 Connecting the appliance
WARNING
Electrical shock hazard!
u
u Electrically ground appliance. u Do not ground to a gas pipe.
u Check with a qualified electrician if you are not sure the appliance is properly grounded.
u Do not have a fuse in the neutral or grounding circuit. u Do not use an extension cord or a multiple socket. u Do not use a power cord that is frayed or damaged.
WARNING
Electrical shock hazard!
This appliance is equipped with a
u Do not remove the round grounding prong from the plug. u Do not use a
-Wait 30 minutes up to 1 hour after installation before you plug in the appliance. This allows the refrigerant and system lubrication to reach equilibrium.
-Make sure incoming voltage is the same as the appliance rating. A
-We recommend using a dedicated circuit for this appliance to prevent electrical overload.
-Follow all Federal, State and local electrical, fire and building codes and ordinances when installing the receptacle and / or the appliance.
-In some communities, a wall switch is required to turn power to the appliance ON and OFF.
-To reduce the risk of fire, electric shock, or personal injury, installation work and electrical wiring must be done by a qualified electrician in accordance with all applicable codes and standards, including
-You are advised to clean the appliance before switching it on the first time (see Cleaning).
-The top of the electric outlet must be located within
13
