Kidde KN-COPE-I manual What To Do When The Alarm Sounds Actuation of your CO Alarm

Page 2
PHONE NUMBER
PHONE NUMBER

What To Do When The Alarm Sounds!

!

WARNING:

Actuation of your CO Alarm

indicates the presence of

 

Carbon Monoxide (CO)

 

which can kill you.

When the carbon monoxide alarm sounds:

If alarm signal sounds:

1) Operate the test/reset button

2) Call your emergency services (Fire Dept. or 911)

3)Immediately move to fresh air - outdoors or by an open door/window. Do a head count to check that all persons are accounted for. Do not reenter the premises nor move away from the open door/ window until the emergency services responders have arrived, the premises has been aired out, and your alarm remains in its normal condition.

4)After following steps 1-3,

if your alarm reactivates within a 24 hour period, repeat steps 1-3 and call

a qualified appliance technician to investigate for sources of CO from fuel burning equipment and appliances, and inspect for proper operation of this equipment. If problems are identified dur ing this inspection have the equipment serviced immediately. Note any combustion equipment not inspected by the technician and consult the manu facturer’s instructions, or contact the manufactur er’s directly, for more information about CO safety and this equipment. Make sure that motor vehi cles are not, and have not been, operating in an attached garage or adjacent to the residence.

Image 2
Contents Photoelectric Smoke and Carbon Monoxide Alarm After following steps What To Do When The Alarm Sounds Actuation of your CO AlarmIf alarm signal sounds Operate the test/reset button What To Do When The Alarm Sounds Never Ignore the Sound of the AlarmWhat To Do When The Alarm Sounds Table of Contents Introduction Product View Alarm SounderBattery Compartment Light Emitting DiodeBack Features Features Smoke Alarm Features Smoke AlarmCarbon Monoxide Alarm Features Carbon Monoxide CO AlarmStep Installation Guide Recommended Installation LocationsSloped Ceiling Installation Mobile HomesWhere Not to Installfor use in ordinary indoor locations Step Wiring Instructions Wiring Requirements Wiring Instructions for AC Quick Connect HAR- NessWires on Alarm Harness Connected to Mounting InstructionsOperating and Installation Instructions Testing the Alarm Interconnect FeatureHush Control Feature Alarm/Peak Level Memory Reset FeatureLow Battery Hush Control LED Indicator Operation Red LEDTamper Resist Features Green LEDPosts CO Alarm Response Time Alarm RemovalBattery Replacement General Maintence General MaintenanceAlarm Replacement Feature Description on page 17 for Removal Instructions Possible Sources Carbon Monoxide Safety InformationGeneral CO Information CO Safety Tips Symptoms of CO PoisoningFire Prevention Fire Safety InformationEscape Plan Industry Safety Standards California State Fire MarshallConsumer Product Safety Commission Warranty and Service Information Warranty and Service Information Questions or for More Information