Kidde KN-COB-DP-H) Part Two Carbon Monoxide The Silent Killer, How to Care for Your CO Alarm

Page 10

Part One – Your Kidde CO Alarm

How to Care for Your CO Alarm

To keep your CO alarm in good working order, you must follow these simple steps:

WHAT YOU SHOULD DO:

•Test the CO alarm once a week by pressing the Test/Reset button •Vacuum the alarm cover once a month to remove accumulated dust. Use the soft brush attachment of your vacuum cleaner, and unplug the CO alarm from the electrical outlet before vacuuming.

•Instruct children never to touch, unplug or otherwise interfere with the unit. Warn children of the dangers of CO poisoning.

WHAT YOU SHOULD NOT DO:

•Never use detergents or solvents to clean the CO alarm. Chemicals can permanently damage or temporarily contaminate the sensor.

•Avoid spraying air fresheners, hair spray, paint or other aerosols near the CO alarm.

•Do not paint the CO alarm. Paint will seal the vents and interfere with proper sensor operation.

•Do not mount the CO alarm directly above or near a diaper pail, as high amounts of methane gas can cause temporary readings on the digital display.

Note: If you will be staining or stripping wood floors or furniture, painting, wall-papering, or using aerosols or adhesives for a do-it-your- self project or hobby, before you begin: Remove the CO alarm to a remote location to prevent possible damage to or contamination of the sensor. You may wish to unplug the CO alarm and store it in a plastic bag during the project.

The following is a list of substances which, at high levels, can affect the sensor and may cause a nuisance alarm that is not a carbon monoxide alarm.

Methane, propane, iso-butane, ethylene, ethanol, alcohol, iso-propanol, benzene, toluene, ethyl acetate, hydrogen, hydro- gen sulfide, sulfur dioxides.

Also most aerosol sprays, alcohol based products, paints, thin- ners, solvents, adhesives, hair sprays, after shaves, perfumes, auto exhaust (cold start) and some cleaning agents.

Part Two – Carbon Monoxide - The Silent Killer

What is Carbon Monoxide?

Carbon monoxide (CO) is an odorless, colorless, poisonous gas creat- ed when any fuel is burned – gasoline, propane, natural gas, oil, wood, coal, and even tobacco. When combustion air is limited, more CO is produced. Serious problems can develop when combustion by- products are not properly vented outside the house.

You’ve probably heard about carbon monoxide poisoning in the news recently. It’s a problem receiving more attention because groups like the American Lung Association and the Consumer Product Safety Commission have made it a priority to warn the public about the dangers of this deadly household poison.

What are the Effects of CO Exposure?

When you breathe carbon monoxide, it enters your bloodstream through your lungs and attaches to red blood cells. These red blood cells, called hemoglobin, carry oxygen throughout your body. Carbon monoxide molecules attach to the red blood cells 200 times faster than oxygen, preventing the flow of oxygen to your heart, brain and vital organs. As carbon monoxide accumulates in your bloodstream, your body becomes starved for oxygen. The amount of carbon monoxide in a person’s body can be measured by a simple blood test, called a “carboxyhemoglobin level” test .

The early symptoms of carbon monoxide poisoning are often mistak- en for the flu – headache, dizziness, weakness, nausea, vomiting, sleepiness, and confusion.

Breathing very high concentrations of carbon monoxide can be lethal in minutes. Breathing low concentrations over time is dangerous, too. Long term exposure to low levels could cause permanent heart and brain damage.

Could Your Family be at Risk for CO Poisoning? Carbon monoxide is the number one cause of poisoning deaths in the United States. According to the Mayo Clinic, at least 10,000 Americans are affected by CO poisoning each year.

While anyone is susceptible, experts agree that unborn babies, small children, senior citizens and people with heart or respiratory prob- lems are especially vulnerable to CO and are at the greatest risk for death or serious injury.

17

18

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Alarm 900-0107Table of Contents About This User’s Guide IntroductionQuick Set Up Guide Setting up your CO alarm for first time operationAbout Your CO Alarm Part One Your Kidde CO AlarmDirect plug unit 11, Where to install your CO alarm Kidde’s Unique FeaturesHome Where to Install Your CO Alarm Where Not to Install Your CO AlarmNormal Operating Characteristics To installChoose a standard 120V outlet to plug alarm into Direct Plug Unit KN-COB-DP-HIf the alarm malfunctions Testing the ElectronicsHow to Know If Your Alarm is Malfunctioning Malfunction Signal Group 1 Component FailurePart Two Carbon Monoxide The Silent Killer How to Care for Your CO AlarmWhat is Carbon Monoxide? What are the Effects of CO Exposure?Home Safety Tips What You Can Do Where Does CO Come From?What Can You do to Protect Your Family? What You Should Not Do Part Three What You Should Know Before the Alarms SoundsClues You Cannot See Part Four What to do When the Alarm Sounds Carbon Monoxide Alarm Procedure Treatment for CO PoisoningPart Five Technical Information TemperatureTest/Reset Button Sometimes it’s Difficult to Find the Source of CO in a HomePart Six Frequently Asked Questions How the CO alarm determines when to alarmHow much electricity does it take to run the CO alarm? Limited Warranty Kidde / Pyrene Corp

KN-COB-DP-H) specifications

The Kidde KN-COB-DP-H is a state-of-the-art combination carbon monoxide and smoke detector designed to enhance safety in residential and commercial environments. With its advanced features and high-quality construction, it represents a reliable solution for protecting occupants from the dangers of smoke and carbon monoxide exposure.

One of the standout features of the Kidde KN-COB-DP-H is its dual-sensor technology. It utilizes both photoelectric and ionization sensors to detect smoke from various sources. Photoelectric sensors are highly effective at detecting smoldering fires, while ionization sensors are better at recognizing fast-flaming fires. This combination maximizes the unit’s effectiveness in accurately identifying different types of fire threats, providing an early warning system that can save lives.

Moreover, the Kidde KN-COB-DP-H is equipped with a highly sensitive carbon monoxide sensor. Carbon monoxide, a colorless and odorless gas, can pose severe health risks, including poisoning and even death. The detector continuously monitors CO levels in the environment and triggers an alarm if concentrations reach dangerous levels, offering peace of mind to users regarding their safety.

Installation and usability are made easy with the Kidde KN-COB-DP-H. It features a simple mounting process that allows users to quickly set it up in key areas of their homes or businesses, such as bedrooms, hallways, and living rooms. The integrated LCD display provides real-time information about the levels of smoke and carbon monoxide, allowing for easy monitoring and awareness.

The detector also boasts a battery backup feature, ensuring that it remains functional even during power outages. With a life span of many years, the carbon monoxide and smoke detector is a long-term investment in safety. Additionally, it comes equipped with a test/silence button, allowing users to easily verify the functionality of the device and silence false alarms.

Overall, the Kidde KN-COB-DP-H combines innovative technology with user-friendly features, delivering comprehensive protection against both smoke and carbon monoxide hazards. Whether in a home or a workplace, this detector stands as a critical component of any safety plan, promoting a secure environment for all occupants. Investing in such a reliable detector is essential for proactive fire and CO safety awareness.
Top Page Image Contents