Kidde KN-COPP-3 manual Carbon Monoxide

Page 1

Carbon Monoxide

Alarm See page

26 for “What to do

when the alarm

sounds”

User’s Guide

Kidde CO Alarm with

Digital Display and Peak Level Memory

Model: KN-COPP-3

Please have the following information ready if you are calling customer Service:

CO Alarm Model Number (Located on the back of alarm):

CO Alarm Assembly Number (Located on back of alarm):

Date of Manufacture (Located on back of alarm):

Date of Purchase:

Where Purchased:

Attention: Please take a few minutes to thoroughly read this manual, which should be saved for future reference and passed on to any subsequent owner. If you have any ques- tions about the operation or installation of your alarm, please call our toll free Consumer Hotline at 1-800-880-6788.

SIGNALING

	LISTED	810-0934
	LISTED	REV D
		REV D

Image 1

Contents Carbon Monoxide Contents Introduction Step Quick Set Up GuideQuick Set Up Guide Step Kidde CO Alarm rear view FeaturesRear view with back door removed Unique Features of this Kidde CO AlarmVolt Back-up Battery What Carbon Monoxide Alarms Can and Cannot Do Where to Install Your CO Alarm Installation InstructionsAT Least 5 Feet away from the appliance Where Not to Install Your CO AlarmDirect Plug Alarm How to Install Your AlarmTo install If the outlet is mounted horizontally sideways Wall Mounted AlarmTo rotate the adapter Allw Table Top AlarmOperation Normal Operating CharacteristicsHow to Test Your Alarm Testing the Electronics When the battery is depletedMalfunction Signal Group 1 Component Failure If the alarm malfunctionsMalfunction Signal Group 2 Microprocessor Failure What to do if you’re not surePeak Level Memory Button To Reset the Peak Level Memory… How to Care for Your Alarm MaintenanceWhat is Carbon Monoxide? Carbon Monoxide SafetyWhere Does CO Come From? What are the Effects of CO Exposure?What Can You do to Protect Your Family? Home Safety Tips What You Can DoNever use a gas range, oven, or clothes dryer for heating What You Should Not DoUnderstand the Effects of Carbon Monoxide Exposure Clues You Cannot SeeCommon Extreme Exposure Symptoms Common Medium Exposure SymptomsEmergency services responders have arrived, Call your emergency servicesNormal operating condition Immediately move to fresh air outdoors or by anTechnical Information How the Unit Determines When to AlarmAccuracy of the Digital Display Display Readings and What They Mean Replacement of the AlarmReadings YOU MAY see When Unit is AC Powered Limited Warranty For Warranty Service Questions or for More Information

Related manuals

Manual 2 pages 19.4 Kb

KN-COPP-3 specifications

The Kidde KN-COPP-3 is an advanced carbon monoxide (CO) and explosive gas detector designed to enhance safety in residential and commercial environments. One of its most notable features is its ability to detect both carbon monoxide and explosive gases like natural gas and propane, making it a dual-function device.

This detector is equipped with an electrochemical sensor that is highly sensitive to carbon monoxide, ensuring early detection of potentially dangerous gas levels. It can detect CO concentrations as low as 30 parts per million (ppm), which is vital for ensuring occupant safety. The device has a loud alarm that sounds when it detects high levels of CO, alerting residents to evacuate the premises immediately.

The Kidde KN-COPP-3 is designed for ease of use and convenience. It features a digital display that shows CO levels in real-time, allowing users to monitor the situation at a glance. Additionally, the unit is equipped with a peak level memory that stores the highest CO concentration detected since the last reset, providing valuable information in case of an alarm event.

In terms of installation, the KN-COPP-3 is easy to set up, requiring just a standard outlet for power. It also includes a backup battery system that ensures it remains operational even in the event of a power outage. This reliability is paramount for safety, as carbon monoxide is a colorless, odorless gas that can pose serious health risks.

Another characteristic of the Kidde KN-COPP-3 is its test and reset button, which allows users to routinely check the functionality of the alarm. Regular testing is important to ensure that the device is in working order and ready to respond in an emergency.

The device also incorporates a low battery warning feature, which alerts users when it's time to replace the batteries or the unit itself, further ensuring safety and peace of mind.

In conclusion, the Kidde KN-COPP-3 is a reliable and user-friendly carbon monoxide and explosive gas detector that combines advanced technology with essential safety features. Its dual detection capabilities, real-time monitoring, and dependable alarm system make it a crucial addition to any home or business to protect occupants from the dangers of CO and explosive gases.