Kidde KN-COPP-3 manual Installation Instructions, Where to Install Your CO Alarm

Page 10

Installation Instructions

Where to Install Your CO Alarm

Your Kidde CO alarm should be mounted in or near bedrooms and living areas. It is recommended that you install a Kidde CO alarm on each level of a multi-level home. You may use the number and location of smoke alarms installed in your home according to current building code requirements as a guide to the location of your Kidde CO alarm(s).

WHEN CHOOSING YOUR INSTALLATION LOCATIONS, MAKE SURE YOU CAN HEAR THE ALARM FROM ALL SLEEPING AREAS. IF YOU INSTALL ONLY ONE CARBON MONOXIDE ALARM IN YOUR HOME, INSTALL THE ALARM NEAR BEDROOMS, NOT IN THE BASEMENT OR FURNACE ROOM.

Two labels have been provided with important information on what to do in case of an alarm. Add the phone number of your emergency service provider in the space provided. Place one label next to the alarm after it is mounted, and one label near a fresh air source such as a door or window.

CAUTION: This alarm will only indicate the presence of carbon monoxide at the sensor. Carbon monoxide may be present in other areas.

IMPORTANT: Improper location can affect the sensitive electronic components in this alarm. Please see the next section describing where NOT to install this alarm.

•Insure that all vents of the unit are unobstructed.

•For tabletop mounting we recommend the unit be placed no higher than three feet from the floor.

Recommended Locations

DINING KITCHEN BEDROOM BEDROOM

LIVING ROOM

BEDROOM

Upper Levels of the Home

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Carbon Monoxide Contents Introduction Quick Set Up Guide StepQuick Set Up Guide Step Features Kidde CO Alarm rear viewUnique Features of this Kidde CO Alarm Rear view with back door removedVolt Back-up Battery What Carbon Monoxide Alarms Can and Cannot Do Installation Instructions Where to Install Your CO AlarmWhere Not to Install Your CO Alarm AT Least 5 Feet away from the applianceDirect Plug Alarm How to Install Your AlarmTo install If the outlet is mounted horizontally sideways Wall Mounted AlarmTo rotate the adapter Table Top Alarm AllwNormal Operating Characteristics OperationWhen the battery is depleted How to Test Your Alarm Testing the ElectronicsMalfunction Signal Group 2 Microprocessor Failure If the alarm malfunctionsMalfunction Signal Group 1 Component Failure What to do if you’re not surePeak Level Memory Button To Reset the Peak Level Memory… Maintenance How to Care for Your AlarmWhere Does CO Come From? Carbon Monoxide SafetyWhat is Carbon Monoxide? What are the Effects of CO Exposure?Home Safety Tips What You Can Do What Can You do to Protect Your Family?What You Should Not Do Never use a gas range, oven, or clothes dryer for heatingClues You Cannot See Understand the Effects of Carbon Monoxide ExposureCommon Medium Exposure Symptoms Common Extreme Exposure SymptomsNormal operating condition Call your emergency servicesEmergency services responders have arrived, Immediately move to fresh air outdoors or by anTechnical Information How the Unit Determines When to AlarmAccuracy of the Digital Display Replacement of the Alarm Display Readings and What They MeanReadings YOU MAY see When Unit is AC Powered Limited Warranty For Warranty Service Questions or for More Information
Related manuals
Manual 2 pages 19.4 Kb

KN-COPP-3 specifications

The Kidde KN-COPP-3 is an advanced carbon monoxide (CO) and explosive gas detector designed to enhance safety in residential and commercial environments. One of its most notable features is its ability to detect both carbon monoxide and explosive gases like natural gas and propane, making it a dual-function device.

This detector is equipped with an electrochemical sensor that is highly sensitive to carbon monoxide, ensuring early detection of potentially dangerous gas levels. It can detect CO concentrations as low as 30 parts per million (ppm), which is vital for ensuring occupant safety. The device has a loud alarm that sounds when it detects high levels of CO, alerting residents to evacuate the premises immediately.

The Kidde KN-COPP-3 is designed for ease of use and convenience. It features a digital display that shows CO levels in real-time, allowing users to monitor the situation at a glance. Additionally, the unit is equipped with a peak level memory that stores the highest CO concentration detected since the last reset, providing valuable information in case of an alarm event.

In terms of installation, the KN-COPP-3 is easy to set up, requiring just a standard outlet for power. It also includes a backup battery system that ensures it remains operational even in the event of a power outage. This reliability is paramount for safety, as carbon monoxide is a colorless, odorless gas that can pose serious health risks.

Another characteristic of the Kidde KN-COPP-3 is its test and reset button, which allows users to routinely check the functionality of the alarm. Regular testing is important to ensure that the device is in working order and ready to respond in an emergency.

The device also incorporates a low battery warning feature, which alerts users when it's time to replace the batteries or the unit itself, further ensuring safety and peace of mind.

In conclusion, the Kidde KN-COPP-3 is a reliable and user-friendly carbon monoxide and explosive gas detector that combines advanced technology with essential safety features. Its dual detection capabilities, real-time monitoring, and dependable alarm system make it a crucial addition to any home or business to protect occupants from the dangers of CO and explosive gases.
Top Page Image Contents