Product Features and Specifications | Kidde KN-COPF-I manual

1. Information About Carbon Monoxide

to low levels may cause symptoms, as well as short-term exposures to high levels. This Kidde unit has a time-weighted alarm – the higher the level of CO present, the sooner the alarm will be triggered.

This CO alarm can only warn you of the presence of CO. It does not prevent CO from occurring, nor can it solve an existing CO problem. If your unit has alarmed and you’ve provided ventilation by leaving your windows and doors open, the CO buildup may have dissipated by the time help responds. Although your problem may appear to be temporarily solved, it’s crucial that the source of the CO is determined and that the appropriate repairs are made.

This CO alarm is designed to act as a monitor; it is not designed for use as a short-term testing device to perform a quick check for the presence of CO.

CO alarms have limitations. Like any other electronic device, CO alarms are not fool-proof. CO alarms have a limited operational life. You must test your CO alarm weekly, because it could fail to operate at any time.

If your CO alarm fails to test properly, or if its self-diagnostic test reveals a malfunction, immediately have the unit replaced. This alarm will not monitor CO levels while in an error condition.

CO alarms can only sense CO that reaches the unit’s sensor. It’s possible that CO may be present in other areas without reaching the alarm. The rate and ability by which CO reaches the alarm may be affected by:

•Doors or other obstructions.

•Fresh air from a vent, an open window or other source.

•CO being present on one level of the home and not reaching a CO alarm installed on a different level. (For example, CO in the basement may not reach an alarm on the second level, near the bedrooms).

For these reasons, we recommend you provide complete coverage by placing a CO alarm on every level of the home. Please carefully read all information in sections 2 and 3 on properly installing this CO alarm.

CO alarms cannot be used to detect the presence of natural gas (methane), propane, butane, or other combustible fuels.

Instruct children never to touch, unplug or otherwise interfere with the alarm. Warn children of the dangers of CO poisoning.

2. Product Features and Specifications

Model KN-COPF-i

		Digital
		Display
	Red LED	Green LED
	Red LED
		Amber LED
	Test/Reset	Peak Level
	Button	Peak Level
	Button	Button
		Button

Alarm

Sounder

IMPORTANT: Seven (7) years after the initial power up, this alarm will “beep” every 30 seconds and display "End" to indicate that it is time to replace the alarm. Replace the alarm immediately! It will not detect CO in this condition. See Maintenance Section for more information regarding End of Life Notification.

To help identify the date to replace the alarm, a label has been affixed to the inside of the cover. Write the “replace by” date (seven years from power up) in a permanent marker on this label.

KN-COPF-I specifications

The Kidde KN-COPF-I is a state-of-the-art carbon monoxide and propane gas detector designed to ensure the safety of homes and commercial spaces. With an emphasis on user-friendly features and advanced technology, this model stands out as a reliable solution for detecting harmful gases that can pose health risks to occupants.

One of the primary features of the Kidde KN-COPF-I is its ability to detect both carbon monoxide and propane gas. Carbon monoxide is a colorless, odorless gas that can be lethal if levels build up within an enclosed space. The KN-COPF-I is equipped with a highly sensitive electrochemical sensor specifically designed to identify even low levels of carbon monoxide. Additionally, the unit detects propane gas leaks, making it suitable for homes that use propane for heating or cooking, further enhancing its versatility in the realm of safety devices.

The KN-COPF-I features a digital display that provides continuous monitoring of both CO and propane levels in real-time. This digital interface allows users to easily keep track of their environmental safety, as it displays the current levels and alerts when they reach dangerous thresholds. The device also includes a peak level memory function, which records the highest concentration of carbon monoxide detected, allowing users to review previous incidents.

Installation and usability are key considerations in the design of the Kidde KN-COPF-I. The unit comes with a mounting bracket, making it simple to install on walls or ceilings in strategic locations throughout the home. It is powered by an AC power source, ensuring continuous operation, while a battery backup provides additional security in the event of a power outage.

Another significant characteristic of the Kidde KN-COPF-I is its safety alarms, which include a loud 85-decibel warning signal for carbon monoxide detection, as well as visual alerts for propane detection. These alarms are crucial for alerting occupants promptly, allowing them to take necessary actions to evacuate or respond to hazards before they escalate.

For added peace of mind, the Kidde KN-COPF-I also features a test/reset button, which allows users to routinely check the functionality of the device and ensure that it operates correctly. This ensures that the detector remains reliable over time.

In conclusion, the Kidde KN-COPF-I combines advanced detection technologies with intuitive features to provide comprehensive protection against carbon monoxide and propane gas. Its digital display, dual detection capability, and easy installation make it an essential device for any safety-conscious household.