Honeywell EC-P2 instruction manual Changing the Target Gas using SMART-CELL Technology

Page 9

The normal operating screen displays the information as shown in Figure 2.

The Honeywell EC-P2 is designed to avoid accidental shut-off of the power. To turn the unit off, the PWR button must be held down for approximately three seconds. Release the button after the “Power Down” message appears.

2.2 Changing the Target Gas using SMART-CELL Technology

The Honeywell EC-P2 can easily be changed to sense another target gas by installing the SMART-CELL for the desired target gas. Each SMART-CELL contains all the calibration and alarm setpoint information on its internal memory chip, so recalibration or reprogramming is not necessary when changing the Honeywell EC-P2 from one gas to another. This procedure can be performed with the unit powered on or off (see Figure 3).

1.Unscrew the two stainless steel thumbscrews and remove the black inlet / outlet manifold lid from the back of the unit.

2.To remove the existing SMART-CELL, grip the sides of the cell and pull it straight out.

3.Install the desired SMART-CELL by gently inserting it into the socket. Notice that the SMART-CELL is keyed so it cannot be inserted incorrectly.

4.Replace the manifold and hand tighten the thumbscrews.

5.Verify proper flow through the sampling wand using the flowmeter provided.

Note:

Extra SMART-CELLS should be kept on the optional sensor keeper when not in use to keep them “warmed up” and ready for immediate use. The sensor keeper is powered by an Alkaline “D” size battery which should be replaced every 6 months.

For a variety of target gases, see page 19 for a list of available SMART-CELLs. Contact Honeywell Analytics if the desired target gas is not listed, as new cells may be available.

Honeywell EC-P2 Instruction and Installation Manual

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Honeywell EC-P2 Page Page Introduction Table of Contents Analog Output Basic Parts of the Honeywell EC-P2 Sensor System DescriptionOperating the Sensor System SpecificationsChanging the Target Gas using SMART-CELL Technology Response/Recovery Time Response TestSample Inlet Port Alarm Functions Display ResolutionInterference Gases Periodic Maintenance MaintenanceSensor Life CalibrationTo Enter Zero / Span Mode TroubleshootingTo Exit Zero / Span Mode Zero CalibrationCalibration of the Honeywell EC-P2 Sensor using a Bypass Tee Alarm Setpoints, Functions Programming and Advanced FeaturesTo Enter Caut / Warn / Alrm Mode To Exit Caut / Warn / Alrm ModeDisplay Variables To Enter AVG / Blank ModeSample Mode EC-P2 software installation To Exit Samp / Meas / Clear ModeData Logging Samp VariableWorking with the EC-P2 program Analog OutputChanging the full scale range on EC-P2 To Enter Range Mode Adjusting the RangeTo Exit Range Mode Available SMART-CELLs Appendix aNH3 H2S NO2 SO2 Hcho SMART-CELL Cross-Sensitivity Table Interference GasesNone means there is no interference Exclusions Limited WarrantyHoneywell EC-P2 Instruction and Installation Manual Page Page Find out more Contact Honeywell Analytics Americas
Related manuals
Manual 17 pages 4.03 Kb

EC-P2 specifications

The Honeywell EC-P2 is a sophisticated and versatile product designed for enabling efficient monitoring and management of various building systems. This advanced device is particularly popular among facility managers and operational teams for its exceptional features and robust technology that enhance the overall functionality of building automation.

One of the standout features of the Honeywell EC-P2 is its dual communication capability. It integrates seamlessly with both BACnet and Modbus protocols, enabling effective interoperability within diverse building management systems. This flexibility allows users to connect various devices and sensors, creating a unified and streamlined infrastructure.

The EC-P2 is equipped with advanced sensor technology that provides real-time data on numerous environmental parameters. By accurately monitoring variables such as temperature, humidity, and air quality, the device plays a crucial role in optimizing indoor comfort and energy efficiency. This real-time monitoring helps facility managers make informed decisions and deploy strategies that reduce energy consumption and operating costs.

Another notable characteristic of the Honeywell EC-P2 is its user-friendly interface. The device comes with an intuitive display that provides easy access to key parameters and system statuses. Users can easily configure settings and troubleshoot any issues directly through the interface, minimizing downtime and improving operational efficiency.

In terms of expandability, the EC-P2 offers multiple I/O options, making it versatile enough to handle various applications. This expandability allows for integration with additional sensors and control devices, ensuring that the system can grow alongside changing operational needs.

Notably, the EC-P2 is designed with security in mind. It incorporates robust security measures to safeguard data and ensure safe communication over the network. This focus on security is increasingly important in today’s connected environments, where cybersecurity threats pose significant risks.

Finally, the Honeywell EC-P2 stands out for its reliability and durability. Built with quality components and rigorous testing standards, it is engineered to function effectively in demanding environments. Whether used in commercial buildings, industrial settings, or educational institutions, the EC-P2 is a trusted solution for modern building management needs.

With its advanced features, wide-ranging compatibility, and focus on efficiency and security, the Honeywell EC-P2 is a pivotal component in creating intelligent, responsive, and sustainable building environments. Its integration capabilities and user-centric design make it an invaluable tool for optimizing operational performance in today's fast-evolving technological landscape.
Top Page Image Contents