Installation

Note only EDL manufactured sensors, which are suitably certified can be connected to the ED810 and fitted in the Hazardous Area. The ED810 control unit and all uncertified equipment should be located in the Safe Area only.

Control Unit: The unit should be mounted in a convenient position for the operator away from possible mechanical damage or ingress of moisture and allowing the clear hinged lid to swing open for ease of calibration etc.

Remove the front cover by unscrewing the thumb screws and then removing the hinges. Fit mounting screws in the slots now exposed. To obtain access to the two lower slotted holes remove the terminal cover.

Note it is not usually necessary to remove the front panel and PCB assembly during installation or calibration.

The power supply should not allow greater than 0.25V drop along its length when carrying 1A plus current required for ancillary equipment connected. Twin core double insulated 15A cable is normally adequate. The main DC input fuse is normally 2A rated but may be increased to 3A allowing for ancillary equipment. External fusing may be necessary and should be considered.

The DC supply should not deviate by more than +/- 25% of the operating voltage stated on the serial number label. It is advisable to wire the gas detector via its own main switch so that it may become operational without having other electrical equipment energised. Allowing a test for gas to be made without the danger of explosion through spark ignition.

Sensor cable entry must only be made through the intended hole via either the standard rubber grommet or cable gland. Sensor cables must not cross or lie over each other or safe area cables see fig1 below.

BB PCB

TERMINAL BLOCK

RUBBERGROMMETSOR

CABLEGLAND KEEPING

CABLESSEPARATED

SAFE AREA CABLES

HAZARDOUSAREA CABLES

FIG 1

4	ED810 INSTRUCTION MANUAL 27-02-07

ED810 specifications

The Barnet Ensign Ross ED810 is a sophisticated and versatile instrument that captures the innovative spirit of modern archery technology. Designed for both seasoned competitors and aspiring archers, the ED810 epitomizes a blend of performance, precision, and cutting-edge engineering.

One of the standout features of the Barnet Ensign Ross ED810 is its lightweight yet sturdy construction. The frame is made from high-quality materials that ensure durability without compromising on maneuverability. This design philosophy enables archers to maintain stability and control, essential components for achieving accuracy.

The bow’s innovative limb design is pivotal in delivering enhanced power and efficiency. Featuring advanced composite materials, the limbs are engineered to optimize energy transfer during the draw cycle, resulting in faster arrow speeds. The ED810 achieves impressive launch velocities, giving archers a competitive edge during tournaments.

Equipped with Barnet's proprietary adjustable sight system, the ED810 allows users to customize their aiming experience easily. The sight features micro-adjustments, enabling fine-tuning to respond to various shooting conditions. This adaptability is crucial for archers aiming for precision, particularly in competitive scenarios where every millimeter counts.

Another distinguishing characteristic of the Barnet Ensign Ross ED810 is its ergonomic grip. The bow's handle is designed to reduce hand torque and improve comfort, making extended shooting sessions more enjoyable. The textured surface offers a secure hold, promoting greater shooting consistency.

The ED810 also integrates state-of-the-art dampening technology, which minimizes vibrations and shock during the release. This feature enhances the overall shooting experience, as it leads to quieter performance and greater accuracy. Less vibration means better arrow flight, crucial for anyone looking to refine their skills.

For archers who value customization, the Barnet Ensign Ross ED810 is compatible with a wide range of accessories. From stabilizers to quivers, archers can personalize their setup according to their preferences. This versatility allows the ED810 to adapt to different shooting styles and conditions.

In summary, the Barnet Ensign Ross ED810 is an exemplary choice for archers seeking a bow that combines advanced technology with user-friendly features. With its lightweight design, powerful limb construction, adjustable sight system, ergonomic grip, and vibration dampening technologies, this bow is engineered to meet the demands of competitive archers and recreational shooters alike. Its commitment to performance and adaptability makes the ED810 a standout in the ever-evolving world of archery.