Essick Air 447 302 Important Filling Information, Casters, Evaporative Wick, CHASSIS/POWER Pack

Page 3

IMPORTANT FILLING INFORMATION

1.Your humidifier is equipped with two water bottles. When both the water bottle and reservoir have emptied, the humidifier fan will automatically shut off, but will start again automatically when the water bottle and reservoir are refilled.

2.When the bottle is being filled for the first time and the wick is still dry, it will take approximately 20 minutes to drain the bottle into the reservoir. After the bottle has emptied, it should be refilled again to obtain maximum running time.

3.When refilling the bottle and the wick is still wet, it will take approximately 12 minutes to refill the reservoir. At this time, you should refill the bottle for maximum running time.

CASTERS

4)Turn the emptied cabinet upside down. Insert each caster stem into the four caster holes on each corner of the humidifier bottom. The casters should fit snugly and be inserted until the stem shoulder reaches the cabinet surface. Do not force.

5)Turn the cabinet right side up.

EVAPORATIVE WICK

6)The wick has a mounting rib on the top edge which hooks over a rib at the inside back of the cabinet. This allows the wick to hang in the water channel (see illustration). Hang wick into cabinet as shown.

AIR CLEANING FILTER (OPTIONAL for 4D7, 427, 447, 697 models)

7)The AirCare filter has four tangs that engage into four keyhole slots that mount the

AirCare filter onto the outside of the back of the cabinet.

CHASSIS/POWER PACK

8)Place the chassis/power pack unit into the cabinet, so it fits without tipping or rocking.

9)Fill the bottle with cool, fresh (preferably unsoftened) water. If you only have softened

water available in your home, you can use it, but you will notice a buildup of minerals on the wick much sooner.

The bottle holds 2.75 (400 Series) 2.6 (600 Series) gallons. When filling, be careful not to pressurize it by overfilling. Bottle damage can result from this. A fill hose is provided with your humidifier which will fit most faucets. Place the water bottle into the left side of the humidifier with the valve cap end down, so that the groove in the water bottle faces the inside. Replace the water bottle cover, and this will complete assembly.

NOTE: For optimum running time, fill the water bottle, tighten the cap, and place inside unit, allowing it to completely drain into the water reservoir. Then refill the bottles and replace the cabinet. Do not fill the reservoir bucket, as overfilling will result in water damage. Use only the bottles provided.

CONTROLS & OPERATION

10)Plug cord into wall receptacle. Your humidifier is now ready for use. The humidifier should be placed at least FOUR inches away from any walls and away from heat registers. Unrestricted airflow into the unit will result in the best efficiency and performance. Set desired levels and speed.

11)Open control panel door by lifting under the tab. Depending on which model, you may have a choice of 2, 4, or variable fan

speed allowing you to use the low setting for the quietest operation or a high setting for maximum output.

Models 4D7 300 and 800 have a digital humidistat with LCD display. The room’s Relative Humidity (%RH) is displayed at the top and the desired humidity level is displayed at the bottom. The desired humidity level can be manually adjusted between 30 and 90%, using the “Set Humidity” button. 45% RH is the suggested initial setting.

12)All models have an automatic humidistat. The humidistat will turn the humidifier on when the relative humidity in your home is below the humidistat setting and will turn the humidifier off when the relative humidity reaches the humidistat setting. For initial operation, set the humidistat at its midpoint “comfort zone” setting and adjust up or down from there to achieve the desired humidity level. Turning the variable speed humidistat all the way counterclockwise will turn the unit off regardless of the relative humidity. This must be turned on again before the unit will work.

13)The refill light will indicate when the unit is completely out of water. The motor will also shut off. The right bottle will empty first. To refill, see Step 9.

**When excessive condensation exists, a lower speed setting is recommended.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents GO to French GO to Spanish Owners Care USE ManualModels SeriesImportant Safeguards ASSEMBLY, Controls & OperationIntroduction Evaporative Wick CHASSIS/POWER PackImportant Filling Information CastersDisinfecting Unit Care and MaintenanceOptional Aircare Filter Removing ScaleManual DE Cuidados USO DEL Propietario ModelosSerie Informaciones Importantes Para EL Llenado Pautas Importantes DE SeguridadIntroducción ENSAMBLAJE, Mandos Y OperaciónControles Y Operación RuedasFILTRO/MECHA Evaporador CHASIS/UNIDAD DE FuerzaDesinfección DE LA Unidad Filtro Aircare OpcionalCuidados Y Mantenimiento Remoción DE SarroGuides ’UTILISATION ’ENTRETIEN DU Propriétaire ModèlesSérie Renseignements Importants SUR LE Remplissage Mesures DE Sécurité ImportantesIntroduction ASSEMBLAGE, Réglage ET FonctionnementCHÂSSIS/BLOC D’ALIMENTATION Réglage ET FonctionnementLES Roulettes Filtre À Mèche D’ÉVAPORATIONDésinfection DE L’APPAREIL Filtre Aircare -1051 OptionnelSoins ET Entretien DétartrageDivision DU Confort À LA Maison Garantie Limitée DE UN AN

4D7 300, 697 500, 447 302 specifications

Essick Air is renowned for its innovative solutions in the realm of evaporative cooling and humidification, and their models such as the 697 500, 4D7 300, and 447 302 exhibit the brand's commitment to quality and performance. These models cater to varying customer needs while upholding high efficiency and reliability.

The Essick Air 697 500 is a powerful evaporative cooler designed to provide optimal comfort in medium to large spaces. It boasts a robust airflow capacity that efficiently circulates cool air, making it suitable for residential and light commercial uses. This model features a multi-speed fan and a durable, corrosion-resistant plastic housing, ensuring longevity and sustained performance. The rugged construction also contributes to its ability to withstand the demands of diverse environments. The 697 500 is equipped with a large water reservoir, minimizing the frequency of refills and making it user-friendly.

On the other hand, the 4D7 300 model is designed to enhance indoor air quality through superior humidification capabilities. It utilizes advanced evaporative technology to maintain a balanced humidity level, which can help alleviate dry skin and respiratory issues associated with low humidity. The compact design of the 4D7 300 makes it easy to place in various settings, from homes to offices. Moreover, it incorporates a quiet operation feature, making it an ideal choice for nighttime use or in environments where noise levels should be kept to a minimum.

Last but not least, the Essick Air 447 302 brings additional functionality with its combination of air purification and humidification. This versatile unit not only adds moisture to the air but also helps eliminate allergens and pollutants, creating a healthier indoor environment. The 447 302 is equipped with a built-in filter system that captures dust and other airborne particles, ensuring cleaner air circulation. Users can easily monitor the water level due to its clear water gauge, and its low-maintenance design allows for easy cleaning and upkeep.

In summary, the Essick Air 697 500, 4D7 300, and 447 302 models exemplify the brand's dedication to crafting efficient and effective air management solutions. Each model is tailored with specific features and technologies, ranging from powerful evaporative cooling to advanced humidification and air purification, catering to the diverse needs of consumers while promoting comfort and health in indoor environments.
Top Page Image Contents