GE ADER50, ADER65, ADER30, ADEH50, ADER40 Using the dehumidifier, Safety, Instructions Operating

Page 5

Using the dehumidifier.

GEAppliances.com

When first using the dehumidifier, operate the unit continuously for 24 hours.

Safety

How the Dehumidifier Operates

Moist, humid air is drawn over a cold refrigerated dehumidifying coil. Moisture in the air condenses on this coil and drains into a bucket (or through

a hose and drain).

Dry, clean air is drawn through the condenser where it is heated and discharged out the top grille into the room.

It is normal for the surrounding air to become slightly warmer as the dehumidifier operates.

Automatic Defrost

When frost builds up on the evaporator coils, the compressor will cycle off and the fan will continue to run until the frost disappears.

When the coil is defrosted, the compressor or fan will automatically restart and dehumidifying will resume.

Instructions Operating

Choosing a Location

A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless there is adequate circulation of air in and out of the area.

■Do not use outdoors.

■This dehumidifier is intended for indoor residential applications only. This dehumidifier should not be used for commercial or industrial applications.

■Place the dehumidifier on a smooth, level floor strong enough to support the unit with a full bucket of water.

■Allow at least 12–18 inches of air space on all sides of the unit for good air circulation.

■Place the dehumidifier in an area where the temperature will not fall below 41°F (5°C). The coils can become covered with frost at temperatures below 41°F, which may reduce performance.

■Use the dehumidifier in cooking, laundry, bathing and dishwashing areas that have excessive moisture. NOTE: Place the dehumidifier away

from the clothes dryer.

■Use the dehumidifier to prevent moisture damage anywhere books or valuables are stored.

■Use the dehumidifier in a basement to help prevent moisture damage.

■The dehumidifier must be operated in an enclosed area to be most effective.

■Close all doors, windows and other outside openings to the room.

YESNO

12″–18″min.

12″–18″min.

NOTE: The dehumidifier has rollers to aid placement, but it should only be rolled on smooth, flat surfaces. Do not attempt to roll the dehumidifier on carpet or over objects.

Instructions Care and Cleaning Troubleshooting Tips Consumer Support

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents You can find them on a label on the back of the dehumidifier Back CoverDo not use an adapter plug with this appliance Tips Care and Cleaning Operating InstructionsGEAppliances.com OperatingAbout the controls on the dehumidifier Instructions Safety InstructionsInstructions Operating Using the dehumidifierSafety Removing Collected Water InstructionsWater Level There are 2 ways to remove collected waterGrille and Case Care and cleaning of the dehumidifierWater Bucket Air FilterSee the Removing Collected Water section See the Care and Cleaning sectionChoosing a Location section Ownership Registration Page Customer Service Tips Care and Cleaning Operating Instructions Safety InstructionsOrder to Make a Warranty Claim What Is Not CoveredSafety Instructions Operating Care and CleaningConseils de dépannage Consignes d’utilisation’utilisez PAS d’adaptateurs avec cet appareil AvertissementConseils de Dépannage Entretien et Nettoyage Fonctionnement ConsignesSafetyConsignes de Sécurité Utilisation du déshumidificateur Choix d’un EmplacementFonctionnement du Déshumidificateur Instructionsde SécuritéNiveau d’Eau Retrait de l’Eau CollectéeAssistance à la Il y a deux faÁons de retirer l’eau collectéeGrille et Boîtier Entretien et nettoyage du déshumidificateurSeau Collecteur Filtre à AirOwnership Registration Page Problème Conseils de dépannage…Pour la période d’ Nous remplacerons Déshumidificateur GE-Garantie Limitée D’un AnPour faire une réclamation Ce qui n’est pas couvertBureau 310, 1 Factory Lane Moncton, N.B. E1C 9M3 Service à la clientèleMoncton, N.B. E1C 9M3 Cuidado y limpieza ¡ADVERTENCIA No USE un enchufe adaptador con este aparato Ayuda al cliente Solución de problemasCuidado y limpieza Seguridad Cuidado y limpieza Solución de problemas Ayuda al clienteCómo funciona el deshumedificador Cómo usar el deshumedificadorSelección del lugar adecuado Descongelado automáticoNivel de agua Cómo desechar el agua acumuladaHay 2 formas de desechar el agua acumulada Tanque esté colocado en la posición apropiadaSeguridad Operación Cuidado y limpieza del deshumedificadorPrecaución no Opere el Ideas para la identificación y solución de problemas… Partir de la fecha Operación Cuidado y limpiezaGEAppliances.com Ayuda al clientePágina Web de GE Appliances By phone at 800.626.2002 during normal business hours Consumer Support
Related manuals
Manual 36 pages 26.07 Kb Manual 13 pages 40.74 Kb

ADER40, ADER50, ADER30, ADEH50, ADER65 specifications

The GE ADEH50 is a cutting-edge heat pump that has gained significant attention in the market for its advanced features and energy-efficient technology. As homeowners and businesses alike seek sustainable solutions for temperature regulation, the ADEH50 emerges as a strong contender, combining efficiency, reliability, and innovative design.

At the heart of the GE ADEH50’s performance is its highly efficient variable-speed compressor. This technology enables the heat pump to adjust its output according to the immediate heating or cooling demands of a space. By operating at different speeds, the ADEH50 can maintain a consistent indoor temperature with minimal energy consumption, significantly reducing electricity costs compared to traditional single-stage systems.

Another noteworthy characteristic of the GE ADEH50 is its use of environmentally friendly refrigerants. The heat pump employs R-410A refrigerant, which has been recognized for its low global warming potential. This commitment to eco-friendly technology not only aligns with environmental regulations but also meets the growing consumer demand for sustainable products.

The ADEH50 also features advanced smart technology integration. It can be connected to Wi-Fi, allowing users to control their heating and cooling systems remotely via smartphone apps. This feature not only enhances convenience but also enables homeowners to optimize energy usage by adjusting settings according to occupancy patterns, ultimately leading to increased savings and a reduced carbon footprint.

In terms of design, the GE ADEH50 is built to withstand various weather conditions. Its robust construction includes a durable cabinet and corrosion-resistant components, ensuring longevity and reduced maintenance needs. The heat pump is also equipped with a quiet operation technology that minimizes noise, making it an ideal choice for residential areas where peace and comfort are a priority.

The GE ADEH50’s capacity options cater to diverse needs, making it suitable for different sizes of spaces. Its energy efficiency is reflected in its high Seasonal Energy Efficiency Ratio (SEER) and Heating Seasonal Performance Factor (HSPF) ratings, which signify its effectiveness in both cooling and heating modes.

In summary, the GE ADEH50 stands out in the heat pump market, offering a blend of advanced technology, environmental sustainability, and reliable performance. With its variable-speed compressor, smart technology integration, and durable design, it is an excellent investment for anyone looking to enhance comfort while promoting energy efficiency and sustainability in their living or working environment.
Top Page Image Contents