GE ADER30 Care and cleaning of the dehumidifier, Grille and Case, Water Bucket, Air Filter

Care and cleaning of the dehumidifier. GEAppliances.com

Turn off the dehumidifier and remove the plug from the wall outlet before cleaning.

Grille and Case

To clean the case:	To clean the front grille:
Use water and a mild detergent. Do not use	Use a vacuum attachment or brush.
bleach or abrasives.

Water Bucket

To clean:

Every few weeks, clean the bucket to prevent growth of mold, mildew and bacteria. Partially fill the bucket with clean water and add a little mild detergent.

Swish it around in the bucket, empty and rinse.

NOTE: Do not use a dishwasher to clean the water bucket.

To remove:

Remove the bucket and pour out any water.

To replace:

Slide the bucket into the dehumidifier.

NOTE: The bucket must be in place and securely seated for the dehumidifier to operate.

Air Filter

The air filter behind the front grille should

be checked and cleaned at least every 250 hours of operation or more often if necessary.

After 250 hours of operation, the Clean the Filter indicator light will glow to remind you to clean the filter. Remove the filter and clean it. Replace the filter and press the Filter Timer pad to turn off the Clean the Filter light.

To remove:
Remove the bucket. Grasp the filter edge, and pull it	NOTE: Avoid using a dishwasher to clean the filter.
straight down and out.

To clean:

Clean the filter with warm, soapy water. Rinse and let the filter dry before replacing it.

NOTE: DO NOT rinse or put the filter in an automatic dishwasher.

CAUTION:

DO NOT operate the dehumidifier without a filter because dirt and lint will clog it and reduce performance.

Safety Instructions Operating Instructions Care and Cleaning Troubleshooting Tips Consumer Support

7