Danby DDR4511, DDR6511 Important Safety Information, Safety Precautions, Grounding Instructions

Page 3

IMPORTANT SAFETY INFORMATION

For your safety, the information in this manual must be followed to minimize the risk of fire, electric shock or personal injury.

SAFETY PRECAUTIONS

When using this dehumidifier, always follow basic safety precautions, including the following:

•Use this appliance only for its intended purpose as described in this Owner’s Manual.

•This dehumidifier must be properly installed and grounded as described in this manual before it is used.

•Never operate this dehumidifier in an area that is likely to accumulate standing water. If this condition develops, for your safety disconnect the power supply before stepping into the water.

•Never unplug your dehumidifier by pulling on the power cord. Always grip plug firmly and pull straight out from the receptacle.

•Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power supply cord must be replaced with a new power supply cord obtained from the manufacturer and not repaired. Do not use a cord that shows cracks or abrasion damage along its length or at either the plug or connector end.

•If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.

•Turn the dehumidifier OFF and unplug it before cleaning.

•For your safety, do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

•All dehumidifiers contain refrigerants, which under federal law must be removed prior to product disposal. If you are getting rid of an old product with refrigerants, check with the company handling disposal about what to do.

•Do not use outdoors.

•This dehumidifier is intended for indoor residential

applications only. This dehumidifier should not be used for commercial or industrial applications.

GROUNDING INSTRUCTIONS

IMPORTANT

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded.

DO NOT use an adapter plug with this appliance.

The power cord of this appliance is equipped with a 3- prong (grounding) plug which mates with a standard 3- prong (grounding) wall outlet to minimize the possibility of electric shock hazard from this appliance.

Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded.

Where a 2-prong wall outlet is encountered, it is your personal responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet.

The dehumidifier should always be plugged into its own individual electrical outlet, which has a voltage rating matching the rating plate.

This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

USE OF EXTENSION CORDS

Because of potential safety hazards under certain conditions, we strongly recommend against the use of an extension cord.

However, if you must use an extension cord, it is absolutely necessary that it be a UL-listed, 14 gauge, 3- wire grounding type appliance extension cord having a grounding type plug and outlet and that the electrical rating of the cord be 15 amperes (minimum) and 125 volts.

SAVE THESE INSTRUCTIONS

2

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Model Modèle Modelo Contents USE of Extension Cords Important Safety InformationSafety Precautions Grounding InstructionsControls Dehumidifier Control SettingsOther Features Operating InstructionsDo not use outdoors HOW the Dehumidifier OperatesChoosing a Location Automatic DefrostRemoving Collected Water Water LevelThere are 2 ways to remove collected water AIR Filter Care and MaintenanceGrille and Case Water BucketTroubleshooting Limited Appliance Warranty ’UTILISEZ PAS de fiche d’adaptation avec cet appareil Mesures DE SécuritéDirectives Relatives À LA Mise À LA Terre Utilisation DES RallongesCommandes Réglages DU DéshumidificateurAutres Fonctions ’utilisez pas cet appareil à l’extérieur Choix D’UN EmplacementFonctionnement DU Déshumidificateur Dégivrage AutomatiqueEnlèvement DE L’EAU Accumulée Niveau DE L’EAUIl existe 2 façons d’enlever l’eau accumulée Filtre À AIR Seau D’EAUMise EN Garde Grille ET BoîtierDépannage Problème Cause Possible SolutionGarantie Limitée SUR Appareil Électroménager Instrucciones DE Conexión a Tierra Información DE Seguridad ImportanteImportante Precauciones DE SeguridadOtras Características Instrucciones DE USOAjustes DE Control DEL Deshumidificador ControlesNo use este aparato al aire libre Cómo Funciona EL DeshumidificadorDescongelación Automática Elección DE LA Mejor UbicaciónEliminación DEL Agua Acumulada Nivel DEL AguaHay 2 formas de eliminar el agua recolectada Balde DEL Agua Cuidado Y MantenimientoAdvertencia Rejilla Y RecintoInterrupción eléctrica Resolución DE FallasEl balde no está debidamente ColocadoGarantía Limitada Para Electrodomésticos Portátiles Deshumidificador Product Type Model Number Part Description Serial Number

DDR3011, DDR6511, DDR4511 specifications

The Danby DDR series includes the DDR4511, DDR6511, and DDR3011 models—three portable dehumidifiers designed to create a comfortable living environment by efficiently removing excess moisture from the air. Each model caters to different space sizes and moisture reduction needs, making them versatile solutions for homes, basements, and offices.

The Danby DDR4511 is suitable for medium-sized spaces, capable of removing up to 45 pints of moisture per day. One of its standout features is the Energy Star certification, which ensures energy-efficient operation. This model also comes equipped with an easy-to-read LED display and an adjustable humidistat that allows users to set their desired humidity level. The auto-restart function is another valuable feature, automatically resuming operation after a power outage, which is essential for maintaining consistent humidity control.

Moving to the Danby DDR6511, this model is designed for larger areas, offering a capacity to extract up to 65 pints of moisture from the air daily. It shares many features with the DDR4511 but includes additional technologies for enhanced performance. The DDR6511 features a built-in pump, allowing for continuous drainage without the hassle of manual tank emptying—a significant advantage for users with larger spaces or those who prefer a low-maintenance option. The dehumidifier also features a quiet operation mode, making it suitable for use in bedrooms or quiet offices.

On the other hand, the Danby DDR3011 is tailored for smaller spaces while still delivering effective moisture removal, with a capacity of up to 30 pints per day. It is particularly advantageous for tight areas, such as laundry rooms and small basements. Like its counterparts, it is Energy Star rated for lower energy consumption. The DDR3011 also includes a convenient auto-restart feature and a defrost function which allows it to operate efficiently even in cooler environments.

All three models feature a removable, easy-to-clean air filter, which helps improve air quality by capturing dust and allergens. Additionally, they are equipped with a sleek design that blends well with various home aesthetics. With user-friendly controls and reliable performance, the Danby DDR4511, DDR6511, and DDR3011 are excellent choices for anyone looking to manage humidity levels effectively in their living spaces.
Top Page Image Contents