Aprilaire 60 & 62 System Checkout, Blower Activation Test, Setting the Humidifier Control

Page 10

SYSTEM CHECKOUT

1.Replace the cover by snapping it into the Humidifier Control base. Also replace the knob onto the Control.

2.TurnBlower Activation switch to OFF

3.Restore power to the HVAC system.

4.Activate the HVAC system or heat pump (Fan or Heat).

5.Once the blower is operating, rotate the knob of the Humidifier Control Clockwise to the “Test/Reset” position. When the knob is set in the “Test/Reset” position, the green “Humidifier On” light will illuminate. After 5 seconds, the green “Humidifier On” light will blink, indicating a system reset.

6.If the Humidifier Control and humidifier are set up properly, you should hear the solenoid valve click into the open position. On the Model 800 Steam Humidifier, the “Steam” light will illuminate green. In the “Test/Reset” position, the humidifier will operate for 1 minute. If the Humidifier Control is left in the “Test/Reset” position for more than 1 minute, the “H” terminals will open (closing the solenoid valve), and the knob and display backlights will flash, indicating that the Humidifier Control is still in the “Test/Reset” position.

7.If the humidifier does not activate with the Humidifier Control in the “Test/Reset” position, refer to the troubleshooting guide.

Blower Activation Test

•Deactivate HVAC system or heat pump.

•Turn knob to OFF.

•Set switch to Blower Activation ON.

•Turn the knob to Test/Reset. The Humidifier On light will illuminate. After 5 seconds, the green “Humidifier On” light will blink, indicating a system reset.

•If the Humidifier Control and humidifier are set up properly, the solenoid valve should click and the HVAC blower should activate.

•If the humidifier does not activate with the Humidifier Control in the “Test/Reset” position, refer to the troubleshooting guide.

•If HVAC blower does not activate with the Humidifier Control in the "Test/Reset" position, refer to the troubleshooting guide.

8.Setting the Humidifier Control:

•If the home is occupied, set the Humidifier Control to “Normal”. (For Manual Mode, set to 35%.)

•If the home is vacant, set the Humidifier Control to “OFF”.

•If in Manual Mode and system is installed during cooling season, set the Humidifier Control to “OFF”.

9.Instruct the homeowner to refer to the Aprilaire Owner’s Manual for the initial adjustment period.

10.Make sure the red “Call Dealer for Service” light is not flashing. If the red “Call Dealer for Service” light is flashing, refer to the troubleshooting guide.

18

19

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Automatic Digital HumidifierControl Model 60 Table of Contents Unpack the Humidifier Control Carton InstallationCheck the Change Water Panel IndicatorSetting Disassemble the Humidifier ControlDetermine Location for Humidifier Control and Mount Control Figure CFigure E Digital Humidifier Control 24V Terminals Locate Existing Access Hole to Outside Determine Location for Outdoor Temperature SensorAlternate Location for Outdoor Temperature Sensor Attach Sensor Wire to Humidifier Control Route the Wire from Control to SensorSecure the sensor bracket with a #8 screw Wiring Description Minimum VA required is 2.0 VA90-1511 System Checkout Setting the Humidifier ControlBlower Activation Test Troubleshooting Guide Humidifier does not operate in Test/Reset mode Figure MHumidifier operates only in Test/Reset mode Yellow Change Water Panel light is blinking see Figure MHumidifier operates constantly Research Products Corporation

60 & 62 specifications

Aprilaire models 60 and 62 are advanced dehumidifiers designed to enhance indoor air quality by effectively controlling humidity levels. These units are particularly suitable for homes in regions where excess moisture can lead to mold growth, structural damage, and discomfort.

Both the Aprilaire 60 and 62 feature a robust moisture removal system, capable of extracting up to 70 pints of moisture per day, depending on the model and conditions. This level of capacity ensures that even in significant humidity scenarios, your indoor environment remains comfortable and healthy.

One of the standout features of these dehumidifiers is their efficiency. The models utilize an Energy Star rating, which indicates they consume less energy while delivering optimal performance. This not only translates to reduced energy bills but also a lower environmental impact compared to less efficient units.

The technology used in Aprilaire dehumidifiers incorporates a built-in humidity control system. This allows users to set the desired humidity level, ensuring that the unit operates only when necessary. This automatic operation can prevent over-drying and maintain consistent humidity, which is crucial for both comfort and health.

Additionally, both models are designed with user-friendly interfaces. They come equipped with digital displays showcasing real-time humidity levels, allowing homeowners to monitor conditions effortlessly. Furthermore, they feature continuous drainage options, meaning that they can be connected to a drainage system to eliminate the hassle of manual water removal.

The Aprilaire 60 and 62 also boast a durable design, built to withstand the rigors of regular use. Their compact size makes them easy to position in a variety of home settings, whether in basements, crawl spaces, or other areas prone to humidity buildup.

In summary, the Aprilaire 60 and 62 dehumidifiers represent cutting-edge technology in humidity control. With high moisture extraction capabilities, energy efficiency, and user-friendly operation, they are ideal solutions for maintaining an optimal home environment. Homeowners seeking a reliable and effective way to manage humidity levels will find these models to be an excellent investment for ensuring comfort and protecting their living spaces from moisture-related issues.
Top Page Image Contents