Desa GA9150A instruction manual To Turn OFF GAS To Appliance, Manual Lighting Procedure

Page 9

OPERATION

Continued

4.Press in and turn control knob clockwise to the OFF position.

5.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety information. If you don’t smell gas, go to the next step.

6.Press in and turn control knob counter-

clockwise to the PILOT position. Press in control knob for five (5) seconds (see Figure 17).

Note: You may be running this log set for the first time after hooking up to gas supply. If so, the control knob may need to be pressed in for 30 seconds or more. This will allow air to bleed from the gas system.

7.With control knob pressed in, press and release ignitor button. This will light pilot. If needed, keep pressing ignitor button until pilot lights.

Note: If pilot does not stay lit, contact a qualified service person or gas supplier for repairs. Until repairs are made, light pilot with match. To light pilot with match, see Manual Lighting Procedure.

8.Keep control knob pressed in for 30 sec- onds after lighting pilot. After 30 seconds, release control knob.

If control knob does not pop out when released, contact a qualified service person or gas supplier for repairs.

Note: If pilot goes out, repeat steps 4 through 8.

9.Slightly push in and turn control knob coun-

terclockwise to the ON position.

10.Wait one minute and switch selector switch to the ON position to light burner.

11.Turn control knob clockwise to the PILOT position, or set selector switch in the OFF position.

 

Ignitor

 

Button

 

Control

 

Knob

 

O

N

F

O

F

P

 

 

T OLI

Figure 17 - Control Knob and Ignitor

Button Location (Shown as Supplied, No

Control Options)

Thermopile

Pilot

Figure 18 - Thermopile and Pilot

TO TURN OFF GAS

TO APPLIANCE

Shutting Off Appliance

1. Turn control knob clockwise to the OFF position.

2.If Using Optional Hand-Held Remote: Set selector switch in the OFF position to prevent draining battery.

3.Turn off all electrical power to appliance if service is to be performed.

MANUAL LIGHTING

PROCEDURE

1.Follow steps 1 through 6 under Lighting Instructions, starting on page 8.

2.Depress control knob and light pilot with match.

3.Keep control knob pressed in for 30 sec- onds after lighting pilot. After 30 seconds, release control knob. Now follow steps 9 and 10, under Lighting Instructions, column 1.

901053-01J

www.desatech.com

9

Image 9
Contents MV Valve 14512 Natural Gas Brass Orifice 901064-09 Jumper Wire 14580With natural gas orifice 901073-01 Propane/LP Brass Orifice Piezo Ignitor Electrode 901072-01 Propane/LP Brass OrificeInstallation Connecting to GAS SupplyCheck GAS Type External Regulator Propane/LP Supply Tank Vent Pointing Down Installation Items NeededChecking GAS Connections Natural GasTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa Natural Gas Installation GA9150A Remote Ready Valve Pilot Kit AssemblyScrew Thermopile Pilot Ignitor Piezo Cover Machine Propane/LP Gas ConversionCover Piezo Ignitor Burner Inlet FittingGas control valve conversion Pilot Flow AdjustmentMounting Screws Rubber Gasket Identification Label Changing Pilot OrificeFor Your Safety Read Before Lighting Remote Control Option HRC100OperatiOn Lighting InstructionsTo Turn OFF GAS To Appliance Manual Lighting ProcedureOpTIONAL Remote OperationOn/Off Series Model HRC100 901053-01J Warranty Keep this WarrantyDesa HEATING, LLC Limited Warranties

GA9150A specifications

The Desa GA9150A is a notable gas heater that offers efficient heating solutions for various residential spaces. Designed for both functionality and aesthetics, the GA9150A embodies a perfect blend of modern technology and traditional design elements.

One of the main features of the Desa GA9150A is its powerful heating capacity. With an output of up to 25,000 BTUs, this gas heater is capable of warming up medium to large rooms quickly, ensuring comfort during the coldest winter months. Its versatile heating options include propane and natural gas, making it adaptable to various home setups and fuel availability.

The GA9150A is also equipped with a stylish, contemporary design that allows it to complement a wide range of home decors. Its sleek appearance is further enhanced by an easy-to-use control panel, providing users with the convenience of adjusting the heat settings according to their preferences.

Safety is a priority in the design of the Desa GA9150A. It includes an automatic shut-off feature that activates in case of low oxygen levels in the room, thereby ensuring peace of mind for users. Additionally, the heater has a built-in flame sensor that monitors the presence of a flame, providing an extra layer of security.

Another key characteristic of the GA9150A is its efficiency. This unit is designed to minimize energy consumption while maximizing output, making it a cost-effective option for homeowners. Its advanced technology allows for quick and effective heating, which can significantly reduce overall energy bills during the colder months.

The heater is also user-friendly, featuring a piezo ignition system that allows for easy start-up without the need for matches or lighters. The adjustable heat settings enable users to customize their heating experience, optimizing comfort and energy use.

In conclusion, the Desa GA9150A stands out in the market for its impressive heating capabilities, safety features, and energy efficiency. It is an excellent choice for anyone seeking a reliable and stylish gas heater that provides warmth and comfort throughout the home. With its blend of technology and thoughtful design, the GA9150A is a worthy investment for enhancing residential living spaces.