Desa GA9150A Propane/LP Gas Conversion, Screw Thermopile Pilot Ignitor Piezo Cover Machine

Page 6

installation

Continued

8.Thread the gas supply adaptor to the fireplace gas supply pipe. Adjust to most convenient position.

9.Install the gas connector tube to the gas supply adapter. Carefully shape tube and attach to gas inlet fitting (see Figure 9, page 5). Be careful not to cause kinks in tube.

10.Test for leaks following instructions in your hearth kit owner’s manual under the sec- tion Testing Burner for Leaks.

11.Retighten and adjust the location of the gas control as necessary. The gas control should be level, with the control knob to the front.

12.Install cover to burner pan using screws provided.

13.Install thermocouple, pilot, and piezo ignitor cover onto valve cover as shown in Figure 10. Use the provided screws.

Screw Thermopile

Pilot

Ignitor

Piezo

Ignitor

Cover

Machine

Screw

Valve

Cover

Piezo Ignitor

Figure 10 - Installing Thermocouple,

Pilot, and Piezo Ignitor Cover (Valve May

Vary from Illustration)

WARNING: You must use a remote ready valve/pilot kit for propane/LP conversion.

Propane/LP Gas Conversion

To convert to propane/LP gas, the regulator pres- sure must be reset also the burner inlet fitting and pilot orifice must be replaced. The propane/ LP burner inlet fitting is supplied with the orifice installed for a 24" log set. If you have an 18" or 30" set, you must change this orifice also.

Burner Inlet Fitting

1.Remove the burner inlet fitting from the burner pan assembly. DO NOT remove the orifice from this fitting. The propane/ LP burner inlet fitting is included in the hardware kit (see Figure 11).

2.Be sure to use the correct orifice for your appliance. The hardware kit included with this appliance contains three orifices with a cone-like shape. If you have an 18" set, the orifice for the burner inlet fitting is red; for a 30" set, it is black. If you have a 24" log set, the orifice is orange.

3.For an 18" or 30" set, use a 10 mm socket or nut driver to install the orifice from the propane/LP burner inlet fitting. Choose the correct orifice for your log set size and install using thread sealant.

4.Using thread sealant (resistant to the action of propane/LP gas) on larger end of fitting, screw the burner inlet fitting through hole and into burner manifold. Tighten using a wrench.

5 . Follow steps 3 through 13 under Natural Gas Installation, page 5.

Injector for

Injector for

Natural Gas

Propane/LP Gas

NATURAL

PROPANE/LP

GAS

GAS FITTING

FITTING

 

Figure 11 - Burner Inlet Fittings with

Injectors

Burner Inlet

Fitting for

Natural Gas

Figure 12 - Remove Burner Inlet Fitting

6

www.desatech.com

901053-01J

Page 5 Page 7
Image 6
Page 5 Page 7
Contents With natural gas orifice 901073-01 Propane/LP Brass Orifice Natural Gas Brass Orifice 901064-09 Jumper Wire 14580MV Valve 14512 Piezo Ignitor Electrode 901072-01 Propane/LP Brass OrificeInstallation Connecting to GAS SupplyCheck GAS Type Installation Items Needed External Regulator Propane/LP Supply Tank Vent Pointing DownChecking GAS Connections Natural GasTest Pressures Equal To or Less Than 1/2 Psig 3.5 kPa GA9150A Remote Ready Valve Pilot Kit Assembly Natural Gas InstallationCover Piezo Ignitor Propane/LP Gas ConversionScrew Thermopile Pilot Ignitor Piezo Cover Machine Burner Inlet FittingMounting Screws Rubber Gasket Identification Label Pilot Flow AdjustmentGas control valve conversion Changing Pilot OrificeOperatiOn Remote Control Option HRC100For Your Safety Read Before Lighting Lighting InstructionsManual Lighting Procedure To Turn OFF GAS To ApplianceOpTIONAL Remote OperationOn/Off Series Model HRC100 901053-01J Warranty Keep this WarrantyDesa HEATING, LLC Limited Warranties

GA9150A specifications

The Desa GA9150A is a notable gas heater that offers efficient heating solutions for various residential spaces. Designed for both functionality and aesthetics, the GA9150A embodies a perfect blend of modern technology and traditional design elements.

One of the main features of the Desa GA9150A is its powerful heating capacity. With an output of up to 25,000 BTUs, this gas heater is capable of warming up medium to large rooms quickly, ensuring comfort during the coldest winter months. Its versatile heating options include propane and natural gas, making it adaptable to various home setups and fuel availability.

The GA9150A is also equipped with a stylish, contemporary design that allows it to complement a wide range of home decors. Its sleek appearance is further enhanced by an easy-to-use control panel, providing users with the convenience of adjusting the heat settings according to their preferences.

Safety is a priority in the design of the Desa GA9150A. It includes an automatic shut-off feature that activates in case of low oxygen levels in the room, thereby ensuring peace of mind for users. Additionally, the heater has a built-in flame sensor that monitors the presence of a flame, providing an extra layer of security.

Another key characteristic of the GA9150A is its efficiency. This unit is designed to minimize energy consumption while maximizing output, making it a cost-effective option for homeowners. Its advanced technology allows for quick and effective heating, which can significantly reduce overall energy bills during the colder months.

The heater is also user-friendly, featuring a piezo ignition system that allows for easy start-up without the need for matches or lighters. The adjustable heat settings enable users to customize their heating experience, optimizing comfort and energy use.

In conclusion, the Desa GA9150A stands out in the market for its impressive heating capabilities, safety features, and energy efficiency. It is an excellent choice for anyone seeking a reliable and stylish gas heater that provides warmth and comfort throughout the home. With its blend of technology and thoughtful design, the GA9150A is a worthy investment for enhancing residential living spaces.
Top Page Image Contents