Cal Flame BBQ08954P, BBQ08852P Problem Plugged orifice, Problem Misalignment of Igniter on Burner

20 Appendix

Problem: Plugged orifice

Solution: Unplug the orifice as follows:

•Remove burner rack and brass burner.

•Using a 7mm socket or socket wrench, remove the brass orifice.

•Gently clear any obstruction with a fine wire.

•Reinstall the orifice and replace the burner racks.

If an obstruction is suspected in the control valve, con- tact your local Cal Flame dealer for assistance.

Problem: Misalignment of Igniter on Burner

Solution: • Check for proper position of the electrode tip, which is next to, but does not touch, the brass burner. It should be pointing straight up and free of grease to allow proper sparking.

•The ignition wire should be connected firmly to the valve ignition device and electrode. Reattach it if it has become disconnected. Replace the ignition wire if it is frayed or cracked.

•With the gas supply closed and control knobs set to the off position, check each position igniter individu- ally for the presence of a spark at the electrode. Push each knob in fully and rotate it about 1/4 turn to the left (counter-clockwise) until you hear a loud click. The trigger hitting the strike block should produce a blue spark at the electrode tip. Return control knob to the off position before checking the next igniter.

Cal Flame Side Burners

www.calspas.com LTR50001082, Rev. B