Safety Instructions
WARNING: Improper installation, adjustment, altera- tion, service or maintenance can cause injury or property damage. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment.
Placement and Location
•Cal Flame side burners are designed for outdoor use only..
•Never locate this appliance in an enclosed room, under a sealed overhead structure, or in any type of enclosed area such as a ga- rage, shed, or breezeway. Keep clear of trees and shrubs.
•Do not place a side burner under or near windows or vents that can be opened into your home.
•Cal Flame side burners are not intended for installation in or on recreational vehicles or boats.
•Maintain sufficient distance as to not overheat any overhead com- bustible material such as a patio cover.
•The area surrounding your new side burner should be kept clean and free from flammable liquids and other combustible materials such as mops, rags or brooms, as well as solvents, cleaning fluids, and gasoline.
•Do not use the side burner or area surrounding the side burner as a storage area for flammable or plastic items. Do not store the liquid propane (LP) cylinder in the vicinity of this or any other ap- pliance when it is not being used.
Set-Up
•We recommend that a licensed contractor install your Cal Flame side burner. Installation must conform to local codes, or in the absence of local codes, with either the National Fuel Gas Code,
ANSI Z223.1 / NFPA54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2), as applicable.
•To prevent fire and smoke damage, remove all packaging material before operating side burner.
•Before you start cooking, clean the entire side burner thoroughly with hot, soapy water. This is necessary to remove residual sol- vents, oil and grease used in the manufacturing process. The grates should also be thoroughly cleaned in the same manner.
Cal Flame Side Burners
1 SafetyInstructions
LTR50001082, Rev. B | www.calspas.com |