USING YOUR APPLIANCE
OPERATING THE APPLIANCE
SWITCHING THE APPLIANCE ON/OFF
Switching on
Switch on the appliance at the master switch (I).
The indicator lamp shows green and the display will show the central heating flow temperature, when the appliance is operating in the central heating mode.
Note: If the display alternates between
The condensate trap filling programme ensures that the condensate trap is filled after the appliance has been installed or after the appliance has been out of use for a long period. For that reason, the appliance remains at minimum heating output for approximately 15 minutes.
Switching off
Switch off the appliance at the master switch (0).
The green indicator lamp goes out. The display on the optional timer (if fitted) will continue to operate until the battery
SETTING THE CENTRAL HEATING TEMPERATURE
Turn the central heating temperature control to the desired level:
Control Setting | Water Temperature |
|
|
approx. 35°C | |
|
|
'E' | approx. 75°C |
|
|
Clockwise limit | approx. 88°C |
When the burner is lit, the red indicator lamp is illuminated.
CONTROLLING CENTRAL HEATING
Set the timer (if fitted) to the correct time.
Set room thermostat to the desired room temperature.
Set temperature driven control unit, if fitted. Refer to the instructions with the control.
Set the thermostatic radiator valves to the desired settings.
8 OPERATING THE APPLIANCE
WORCESTER BOSCH GREENSTAR HIGHFLOW 440 6 720 611 731a (08.04)