Ignition procedure, Adjusting the heating

User Manual

Initial operating procedures

Filling instructions

Check the water pressure on the pressure gauge regularly and make sure that the figure is between 0.6 and1.5 bar when the system is cold. If the pressure is just under the minimum value, re-establish the correct pressure by using the filling loop.

If the pressure drops very frequently, there may be a water leak at some point in the system. If this is the case a plumber should be contacted

Ignition procedure

Press the ON/OFF button on the control panel to switch on the boiler. The green LED 3 will illuminate indicating that the boiler is ready to operate.

The electronic control unit will ignite the burner, without any manual intervention but in response to the request for Domestic Hot Water or Central Heating. If, after approximately 10 seconds, the burner has not ignited, the boiler’s safety devices will shut off the gas and the red LED 8 illuminates. To reset the ignition system, the Reset button 10 must be pressed and released.

Adjusting the heating

It is possible to set the temperature of the heating water by adjusting the knob 5. By positioning the indicator somewhere between min. and max. A temperature may be obtained which varies from approximately 40°C to approximately 82°C.

The water temperature in the primary circuit may be checked by means of the green leds 1.

50°	60°	70°	80°
40°			90°

on/off





				I

			O

50°	60°	70°	80°
40°			90°

on/off





			I

			O

Should the boiler fail to ignite a second time, check that the external gas cock is open. If the problem persists, contact an Authorised Service Centre.

50°	60°	70°	80°
40°			90°

on/off





			I

		O

Winter or summer operating modes

In the “winter” operating mode, the boiler will produce both Central Heating and Domestic Hot Water. In the “summer” operating mode, the boiler will produce only Domestic Hot Water. Using the knob on the control panel, the user can select “winter” or “summer” operating mode. Keeping the knob 5 at the position selects the “summer” operating mode. “Winter” operating mode may be selected by positioning the knob 5 between the min. and max. settings.

Domestic Hot Water temperature adjustment - E-COMBI

It is possible to set the temperature of the domestic hot water by adjusting the knob 6. A temperature may be obtained which varies from approximately 36°C to approximately 60°C.

50°	60°	70°	80°
40°			90°

on/off





				I

		O

Switching off the heating

To switch off the heating mode turn

the button 5 to the position . The boiler will now only produce Domestic Hot Water.

Stand by

To switch off the boiler press the ON/OFF button 2. The green LED 3 will go off.

Switch off the boiler completely by switching the external electrical switch to the OFF position.

50°	60°	70°	80°
40°			90°

on/off





			I

			O
			O

47 - 116 - 63, 41 - 116 - 34, 41 - 116 - 35, 47 - 116 - 62, 47 - 116 - 64 specifications

Ariston is a well-known brand in the realm of heating solutions, with products designed to meet diverse needs for comfort and efficiency. Among its notable offerings are the models Ariston 47 - 116 - 64, 47 - 116 - 62, 41 - 116 - 35, 41 - 116 - 34, and 47 - 116 - 63. Each of these models is engineered with specific features that cater to varying demands in heating systems, making Ariston a trusted choice for consumers looking for reliability and performance.

The Ariston 47 - 116 - 64 is characterized by its high-efficiency heat exchange technology, which ensures optimal energy use, translating to lower utility bills. Combining this with advanced control systems allows users to fine-tune temperature settings for maximum comfort. It features a sleek design, making it suitable for modern homes, and its compact nature allows for easy installation in limited spaces.

Similarly, the 47 - 116 - 62 model emphasizes user-friendly controls with intuitive interfaces to simplify operation. This unit is also engineered with robust materials that enhance durability, ensuring years of reliable service. Its energy-saving rating is particularly appealing for environmentally-conscious consumers, as it contributes to reduced carbon footprints.

The Ariston 41 - 116 - 35 model supports advanced connectivity options, enabling users to control their heating systems remotely via smartphone applications. This feature not only adds convenience but also allows for better energy management. The model is built to cope with varying load demands, making it adaptable for residential or commercial settings.

In addition, the 41 - 116 - 34 is praised for its silent operation, catering to those who prioritize tranquility in their living environments. It incorporates cutting-edge noise reduction technology, making it ideal for bedrooms or study areas.

Finally, the Ariston 47 - 116 - 63 rounds out this series with its powerful heating capability. Designed to heat larger spaces efficiently, it maintains consistent temperatures across various rooms, providing comprehensive coverage.

Overall, each Ariston model boasts distinctive features, state-of-the-art technologies, and excellent performance characteristics, ensuring comfort and efficiency in diverse applications. Whether for a home, office, or commercial space, the Ariston series meets the demands of modern heating needs while prioritizing sustainability and user control.