Boiler Comparison Guide
Space Requirements – 3,000 MBH Boiler
BRYAN | Other Water Tubes |
Competitive water tube boilers can require twice as much space for service for half as much capacity. Bryans' standard and reverse combination make it the best investment.
Cast Iron | Firetube |
Cast iron boilers require a | Firetube boilers require |
section width area for service, | floor space equal to boiler |
equals wider foot print. | size for tube removal. |
Space requirements. Bryan flexible water tube steel boilers generally require less floor space than comparable cast iron units. The bent tube, removable from only one side, requires approximately 24 to 32 inches of service area, the same as most cast iron boilers.
With a firetube steel boiler, the floor space used by the unit itself must be doubled in order to accommodate tube replacement.
An additional
Cleaning.Generally speaking, easy access makes Bryan flexible water tube steel boilers more convenient to clean than either cast iron or firetube units.
Removing a Bryan boiler’s jacket access door and tube panel exposes the entire bank of flexible water tubes. An ordinary flue brush and vacuum cleaner are all that is needed for complete cleaning.
Maintenance.With cast iron or firetube boilers, replacing the unit or tubes often means complete disassembly, welding, rolling and an outside contractor. The water tubes in a Bryan flexible water tube steel boiler, on the
other hand, can be replaced by a general maintenance worker in about thirty minutes.
Replacement tubes are available from Bryan representatives within
Bryan design provides easy access for the service and maintenance of tubes and burner.
5