Crown Boiler BWC150, BWC225 manual Crown CPVC/PVC Venting Components

Page 9

FIGURE 1.4: HORIZONTAL CPVC/PVC VENTING, BWC150/225 (Vent Option #3, 4)

TABLE 1.5: CROWN CPVC/PVC VENTING COMPONENTS

 

 

USED ON

 

CROWN PN

DESCRIPTION

VENT

COMMENTS

 

 

OPTION #

 

230595

CPVC/PVC VENT KIT, BWC070/090/120/151

1,2,5,6

 

230596

CPVC/PVC VENT KIT, BWC150

3,7

 

230597

CPVC/PVC VENT KIT, BWC225

4,8

 

230873

PVC CONCENTRIC TERMINAL

2,6

Use with BWC070/090/120/151 Only

Note: BWC070/090/120/151 may be ordered with components in 230595 vent kit packaged inside the boiler carton.

4.Pitch of Horizontal Piping - Pitch all horizontal piping 1/4” per foot so that any condensate which forms in the piping will run towards the boiler.

5.Supporting Pipe - Vertical and horizontal sections of pipe must be properly supported. Maximum support spacing is four feet.

6.Allowing for Thermal Expansion - Design the vent system to allow 3/8” of thermal expansion for every 10ft of CPVC/PVC pipe. The boiler will always act as an anchor to one end of the vent system. If at all possible, select and install hangers and wall thimbles so that the vent system can expand towards the terminal. When a straight run of pipe exceeds 20ft and must be restrained at both ends, an offset or expansion loop must be provided (Figures 1.11a, 1.11b). When a straight horizontal run of pipe exceeds 20ft and is restrained at one end with an elbow at the other, avoid putting a hanger or guide less than “Y” inches from the elbow in the adjoining straight section (Figure 1.11c).

Thermal expansion fittings are not permitted.

7

Image 9
Contents BWC Series Page Page Vent System Design Summary of Horizontal Venting Options Page Page Page Crown CPVC/PVC Venting Components Crown CPVC/PVC Vent KIT Contents 9c Positioning Vent Terminal Under Overhangs 10 Snorkel Terminal Configuration 12 Summary of Vertical Venting Options 13 Wall Penetration Clearances for PVC Vent Pipe 15 Vertical CPVC/PVC VENTING, BWC070/090/120/151 Vent Option Assembly of CPVC/PVC Vent Systems 17 Installation of VENT/INTAKE Adaptor BWC070/090/120/151 19 Installation of Standard Horizontal Terminals 20 Installation of Standard Vertical Terminals Page 22 Installation of Optional Concentric Terminal Through Roof Condensate Trap and Drain Line 23 Condensate Piping Arrangement BWC070/090/120/151 Removing an Existing Boiler From a Common Chimney Page PN 980034 Rev 10/10

BWC225, BWC150 specifications

The Crown Boiler BWC series, specifically the BWC150 and BWC225 models, are renowned for their performance and efficiency in residential and commercial heating applications. These boilers are designed to provide optimal heating while ensuring reliability and user-friendliness.

A standout feature of the BWC series is its high efficiency. Both the BWC150 and BWC225 are equipped with cutting-edge technology that maximizes energy use, effectively reducing operating costs. Their design utilizes a modulating burner, which adjusts the heat output based on demand. This modulation not only enhances comfort levels by maintaining a steady temperature but also conserves energy, making these models eco-friendly options.

The BWC series incorporates a durable cast-iron heat exchanger, known for its longevity and excellent heat transfer capabilities. This feature ensures that the boilers can withstand the rigors of daily operation while delivering consistent performance over time. Furthermore, the built-in control systems allow for precise monitoring and adjustment, ensuring that users have access to real-time information about their heating systems.

Another notable characteristic is the compact design of these boilers. The BWC150 and BWC225 fit seamlessly into various spaces, making them ideal for both new installations and replacements in existing systems. The straightforward installation process is a significant advantage for contractors and homeowners alike, saving time and resources.

Moreover, safety is a priority in the design of the BWC series. Each model includes multiple safety features, including low water cut-off, high-temperature limit control, and pressure relief valves. These features not only protect the boiler itself but also ensure the safety of the home or building in which it operates.

The Crown Boiler BWC series also boasts compatibility with various heating systems, including hot water baseboard, radiators, and in-floor heating, providing versatility to meet different heating needs. Its user-friendly interface and control options make it accessible to users, whether they are tech-savvy or not.

In conclusion, the Crown Boiler BWC150 and BWC225 models offer a combination of energy efficiency, robust construction, and advanced technology. With their modulating burners, durable heat exchangers, compact design, and safety features, these boilers are an excellent choice for anyone looking to invest in a reliable heating solution.